A Particle Emitter is a special kind of Game Object that controls a pool of Particles.
Particle Emitters are created via a configuration object. The properties of this object can be specified in a variety of formats, given you plenty of scope over the values they return, leading to complex visual effects. Here are the different forms of configuration value you can give:
An explicit static value:
x: 400
The x value will always be 400 when the particle is spawned.
A random value:
x: [ 100, 200, 300, 400 ]
The x value will be one of the 4 elements in the given array, picked at random on emission.
A custom callback:
x: (particle, key, t, value) => {
return value + 50;
}
The x value is the result of calling this function. This is only used when the particle is emitted, so it provides it's initial starting value. It is not used when the particle is updated (see the onUpdate callback for that)
A start / end object:
This allows you to control the change in value between the given start and end parameters over the course of the particles lifetime:
scale: { start: 0, end: 1 }
The particle scale will start at 0 when emitted and ease to a scale of 1 over the course of its lifetime. You can also specify the ease function used for this change (the default is Linear):
scale: { start: 0, end: 1, ease: 'bounce.out' }
A start / end random object:
The start and end object can have an optional random
parameter.
This forces it to pick a random value between the two values and use
this as the starting value, then easing to the 'end' parameter over
its lifetime.
scale: { start: 4, end: 0.5, random: true }
The particle will start with a random scale between 0.5 and 4 and then
scale to the end value over its lifetime. You can combine the above
with the ease
parameter as well to control the value easing.
An interpolation object:
You can provide an array of values which will be used for interpolation
during the particles lifetime. You can also define the interpolation
function to be used. There are three provided: linear
(the default),
bezier
and catmull
, or you can provide your own function.
x: { values: [ 50, 500, 200, 800 ], interpolation: 'catmull' }
The particle scale will interpolate from 50 when emitted to 800 via the other points over the course of its lifetime. You can also specify an ease function used to control the rate of change through the values (the default is Linear):
x: { values: [ 50, 500, 200, 800 ], interpolation: 'catmull', ease: 'bounce.out }
A stepped emitter object:
The steps
parameter allows you to control the placement of sequential
particles across the start-end range:
x: { steps: 32, start: 0, end: 576 }
Here we have a range of 576 (start to end). This is divided into 32 steps.
The first particle will emit at the x position of 0. The next will emit at the next 'step' along, which would be 18. The following particle will emit at the next step, which is 36, and so on. Because the range of 576 has been divided by 32, creating 18 pixels steps. When a particle reaches the 'end' value the next one will start from the beginning again.
A stepped emitter object with yoyo:
You can add the optional yoyo
property to a stepped object:
x: { steps: 32, start: 0, end: 576, yoyo: true }
As with the stepped emitter, particles are emitted in sequence, from 'start' to 'end' in step sized jumps. Normally, when a stepped emitter reaches the end it snaps around to the start value again. However, if you provide the 'yoyo' parameter then when it reaches the end it will reverse direction and start emitting back down to 'start' again. Depending on the effect you require this can often look better.
A min / max object:
This allows you to pick a random float value between the min and max properties:
x: { min: 100, max: 700 }
The x value will be a random float between min and max.
You can force it select an integer by setting the 'int' flag:
x: { min: 100, max: 700, int: true }
Or, you could use the 'random' array approach (see below)
A random object:
This allows you to pick a random integer value between the first and second array elements:
x: { random: [ 100, 700 ] }
The x value will be a random integer between 100 and 700 as it takes the first element in the 'random' array as the 'min' value and the 2nd element as the 'max' value.
Custom onEmit and onUpdate callbacks:
If the above won't give you the effect you're after, you can provide your own callbacks that will be used when the particle is both emitted and updated:
x: {
onEmit: (particle, key, t, value) => {
return value;
},
onUpdate: (particle, key, t, value) => {
return value;
}
}
You can provide either one or both functions. The onEmit
is called at the
start of the particles life and defines the value of the property on birth.
The onUpdate
function is called every time the Particle Emitter updates
until the particle dies. Both must return a value.
The properties are:
particle - A reference to the Particle instance. key - The string based key of the property, i.e. 'x' or 'lifespan'. t - The current normalized lifetime of the particle, between 0 (birth) and 1 (death). value - The current property value. At a minimum you should return this.
By using the above configuration options you have an unlimited about of control over how your particles behave.
v3.55 Differences
Prior to v3.60 Phaser used a ParticleEmitterManager
. This was removed in v3.60
and now calling this.add.particles
returns a ParticleEmitter
instance instead.
In order to streamline memory and the display list we have removed the
ParticleEmitterManager
entirely. When you call this.add.particles
you're now
creating a ParticleEmitter
instance, which is being added directly to the
display list and can be manipulated just like any other Game Object, i.e.
scaled, rotated, positioned, added to a Container, etc. It now extends the
GameObject
base class, meaning it's also an event emitter, which allowed us
to create some handy new events for particles.
So, to create an emitter, you now give it an xy coordinate, a texture and an emitter configuration object (you can also set this later, but most commonly you'd do it on creation). I.e.:
const emitter = this.add.particles(100, 300, 'flares', {
frame: 'red',
angle: { min: -30, max: 30 },
speed: 150
});
This will create a 'red flare' emitter at 100 x 300.
Please update your code to ensure it adheres to the new function signatures.
Constructor
new ParticleEmitter(scene, [x], [y], [texture], [config])
Parameters
name | type | optional | description |
---|---|---|---|
scene | No | The Scene to which this Game Object belongs. A Game Object can only belong to one Scene at a time. | |
x | number | Yes | The horizontal position of this Game Object in the world. |
y | number | Yes | The vertical position of this Game Object in the world. |
texture | string | Phaser.Textures.Texture | Yes | The key, or instance of the Texture this Game Object will use to render with, as stored in the Texture Manager. |
config | Yes | Settings for this emitter. |
Scope: static
Extends
Phaser.GameObjects.GameObject
Phaser.GameObjects.Components.AlphaSingle
Phaser.GameObjects.Components.BlendMode
Phaser.GameObjects.Components.Depth
Phaser.GameObjects.Components.Mask
Phaser.GameObjects.Components.Pipeline
Phaser.GameObjects.Components.PostPipeline
Phaser.GameObjects.Components.ScrollFactor
Phaser.GameObjects.Components.Texture
Phaser.GameObjects.Components.Transform
Phaser.GameObjects.Components.Visible
Source: src/gameobjects/particles/ParticleEmitter.js#L104
Since: 3.60.0
Public Members
acceleration
acceleration: boolean
Description:
Whether accelerationX and accelerationY are non-zero. Set automatically during configuration.
Source: src/gameobjects/particles/ParticleEmitter.js#L458
Since: 3.0.0
accelerationX
accelerationX: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The horizontal acceleration applied to emitted particles, in pixels per second squared.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3094
Since: 3.60.0
accelerationY
accelerationY: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The vertical acceleration applied to emitted particles, in pixels per second squared.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3118
Since: 3.60.0
active
active: boolean
Description:
The active state of this Game Object.
A Game Object with an active state of true
is processed by the Scenes UpdateList, if added to it.
An active object is one which is having its logic and internal systems updated.
Inherits: Phaser.GameObjects.GameObject#active
Source: src/gameobjects/GameObject.js#L113
Since: 3.0.0
alpha
alpha: number
Description:
The alpha value of the Game Object.
This is a global value, impacting the entire Game Object, not just a region of it.
Inherits: Phaser.GameObjects.Components.AlphaSingle#alpha
Source: src/gameobjects/components/AlphaSingle.js#L68
Since: 3.0.0
angle
angle: number
Description:
The angle of this Game Object as expressed in degrees.
Phaser uses a right-hand clockwise rotation system, where 0 is right, 90 is down, 180/-180 is left and -90 is up.
If you prefer to work in radians, see the rotation
property instead.
Inherits: Phaser.GameObjects.Components.Transform#angle
Source: src/gameobjects/components/Transform.js#L211
Since: 3.0.0
animCounter
animCounter: number
Description:
The internal animation counter.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3736
Since: 3.60.0
animQuantity
animQuantity: number
Description:
The number of consecutive particles that receive a single animation (per frame cycle).
Source: src/gameobjects/particles/ParticleEmitter.js#L784
Since: 3.60.0
anims
anims: Array.<string>
Description:
The animations assigned to particles.
Source: src/gameobjects/particles/ParticleEmitter.js#L764
Since: 3.60.0
blendMode
blendMode: Phaser.BlendModes, string, number
Description:
Sets the Blend Mode being used by this Game Object.
This can be a const, such as Phaser.BlendModes.SCREEN
, or an integer, such as 4 (for Overlay)
Under WebGL only the following Blend Modes are available:
- NORMAL
- ADD
- MULTIPLY
- SCREEN
- ERASE
Canvas has more available depending on browser support.
You can also create your own custom Blend Modes in WebGL.
Blend modes have different effects under Canvas and WebGL, and from browser to browser, depending on support. Blend Modes also cause a WebGL batch flush should it encounter a new blend mode. For these reasons try to be careful about the construction of your Scene and the frequency of which blend modes are used.
Inherits: Phaser.GameObjects.Components.BlendMode#blendMode
Source: src/gameobjects/components/BlendMode.js#L30
Since: 3.0.0
body
body: Phaser.Physics.Arcade.Body, Phaser.Physics.Arcade.StaticBody, MatterJS.BodyType
Description:
If this Game Object is enabled for Arcade or Matter Physics then this property will contain a reference to a Physics Body.
Inherits: Phaser.GameObjects.GameObject#body
Source: src/gameobjects/GameObject.js#L186
Since: 3.0.0
bounce
bounce: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The amount of velocity particles will use when rebounding off the emitter bounds, if set. A value of 0 means no bounce. A value of 1 means a full rebound.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3318
Since: 3.60.0
cameraFilter
cameraFilter: number
Description:
A bitmask that controls if this Game Object is drawn by a Camera or not.
Not usually set directly, instead call Camera.ignore
, however you can
set this property directly using the Camera.id property:
Inherits: Phaser.GameObjects.GameObject#cameraFilter
Source: src/gameobjects/GameObject.js#L160
Since: 3.0.0
colorEase
colorEase: string
Description:
Controls the easing function used when you have created an
Emitter that uses the color
property to interpolate the
tint of Particles over their lifetime.
Setting this has no effect if you haven't also applied a
particleColor
to this Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L3435
Since: 3.60.0
completeFlag
completeFlag: boolean
Description:
The internal complete flag.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3805
Since: 3.60.0
config
config: Phaser.Types.GameObjects.Particles.ParticleEmitterConfig
Description:
An internal object holding the configuration for the Emitter.
These are populated as part of the Emitter configuration parsing.
You typically do not access them directly, but instead use the
ParticleEmitter.setConfig
or ParticleEmitter.updateConfig
methods.
Source: src/gameobjects/particles/ParticleEmitter.js#L372
Since: 3.85.0
currentAnim
currentAnim: number
Description:
The current animation index.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3897
Since: 3.60.0
currentFrame
currentFrame: number
Description:
The current frame index.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3874
Since: 3.60.0
data
data: Phaser.Data.DataManager
Description:
A Data Manager.
It allows you to store, query and get key/value paired information specific to this Game Object.
null
by default. Automatically created if you use getData
or setData
or setDataEnabled
.
Inherits: Phaser.GameObjects.GameObject#data
Source: src/gameobjects/GameObject.js#L136
Since: 3.0.0
deathCallback
deathCallback: Phaser.Types.GameObjects.Particles.ParticleDeathCallback
Description:
A function to call when a particle dies.
Source: src/gameobjects/particles/ParticleEmitter.js#L501
Since: 3.0.0
deathCallbackScope
deathCallbackScope: *
Description:
The calling context for Phaser.GameObjects.Particles.ParticleEmitter#deathCallback.
Source: src/gameobjects/particles/ParticleEmitter.js#L511
Since: 3.0.0
deathZones
deathZones: Array.<Phaser.GameObjects.Particles.Zones.DeathZone>
Description:
An array containing Particle Death Zone objects. A particle is immediately killed as soon as its x/y coordinates intersect with any of the configured Death Zones.
Prior to Phaser v3.60 an Emitter could only have one single Death Zone. In 3.60 they can now have an array of Death Zones.
Source: src/gameobjects/particles/ParticleEmitter.js#L660
Since: 3.60.0
defaultPipeline
defaultPipeline: Phaser.Renderer.WebGL.WebGLPipeline
Description:
The initial WebGL pipeline of this Game Object.
If you call resetPipeline
on this Game Object, the pipeline is reset to this default.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.Pipeline#defaultPipeline
Source: src/gameobjects/components/Pipeline.js#L19
Since: 3.0.0
delay
delay: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The number of milliseconds to wait after emission before the particles start updating. This allows you to emit particles that appear 'static' or still on-screen and then, after this value, begin to move.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3633
Since: 3.60.0
depth
depth: number
Description:
The depth of this Game Object within the Scene. Ensure this value is only ever set to a number data-type.
The depth is also known as the 'z-index' in some environments, and allows you to change the rendering order of Game Objects, without actually moving their position in the display list.
The default depth is zero. A Game Object with a higher depth value will always render in front of one with a lower value.
Setting the depth will queue a depth sort event within the Scene.
Inherits: Phaser.GameObjects.Components.Depth#depth
Source: src/gameobjects/components/Depth.js#L30
Since: 3.0.0
displayList
displayList: Phaser.GameObjects.DisplayList, Phaser.GameObjects.Layer
Description:
Holds a reference to the Display List that contains this Game Object.
This is set automatically when this Game Object is added to a Scene or Layer.
You should treat this property as being read-only.
Inherits: Phaser.GameObjects.GameObject#displayList
Source: src/gameobjects/GameObject.js#L53
Since: 3.50.0
duration
duration: number
Description:
The number of milliseconds this emitter will emit particles for when in flow mode, before it stops emission. A value of 0 (the default) means there is no duration.
When the duration expires the STOP
event is emitted. Note that entering a
stopped state doesn't mean all the particles have finished, just that it's
not emitting any further ones.
To know when the final particle expires, listen for the COMPLETE event.
The counter is reset each time the ParticleEmitter.start
method is called.
0 means the emitter will not stop based on duration.
Source: src/gameobjects/particles/ParticleEmitter.js#L571
Since: 3.60.0
elapsed
elapsed: number
Description:
The internal elasped counter.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3759
Since: 3.60.0
emitCallback
emitCallback: Phaser.Types.GameObjects.Particles.ParticleEmitterCallback
Description:
A function to call when a particle is emitted.
Source: src/gameobjects/particles/ParticleEmitter.js#L481
Since: 3.0.0
emitCallbackScope
emitCallbackScope: *
Description:
The calling context for Phaser.GameObjects.Particles.ParticleEmitter#emitCallback.
Source: src/gameobjects/particles/ParticleEmitter.js#L491
Since: 3.0.0
emitting
emitting: boolean
Description:
Controls if the emitter is currently emitting a particle flow (when frequency >= 0).
Already alive particles will continue to update until they expire.
Controlled by Phaser.GameObjects.Particles.ParticleEmitter#start and Phaser.GameObjects.Particles.ParticleEmitter#stop.
Source: src/gameobjects/particles/ParticleEmitter.js#L607
Since: 3.0.0
emitZones
emitZones: Array.<Phaser.Types.GameObjects.Particles.EmitZoneObject>
Description:
An array containing Particle Emission Zones. These can be either EdgeZones or RandomZones.
Particles are emitted from a randomly selected zone from this array.
Prior to Phaser v3.60 an Emitter could only have one single Emission Zone. In 3.60 they can now have an array of Emission Zones.
Source: src/gameobjects/particles/ParticleEmitter.js#L645
Since: 3.60.0
flowCounter
flowCounter: number
Description:
The internal flow counter.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3690
Since: 3.60.0
follow
follow: Phaser.Types.Math.Vector2Like
Description:
A Game Object whose position is used as the particle origin.
Source: src/gameobjects/particles/ParticleEmitter.js#L699
Since: 3.0.0
followOffset
followOffset: Phaser.Math.Vector2
Description:
The offset of the particle origin from the Phaser.GameObjects.Particles.ParticleEmitter#follow target.
Source: src/gameobjects/particles/ParticleEmitter.js#L711
Since: 3.0.0
frame
frame: Phaser.Textures.Frame
Description:
The Texture Frame this Game Object is using to render with.
Inherits: Phaser.GameObjects.Components.Texture#frame
Source: src/gameobjects/components/Texture.js#L30
Since: 3.0.0
frameCounter
frameCounter: number
Description:
The internal frame counter.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3713
Since: 3.60.0
frameQuantity
frameQuantity: number
Description:
The number of consecutive particles that receive a single texture frame (per frame cycle).
Source: src/gameobjects/particles/ParticleEmitter.js#L753
Since: 3.0.0
frames
frames: Array.<Phaser.Textures.Frame>
Description:
The texture frames assigned to particles.
Source: src/gameobjects/particles/ParticleEmitter.js#L733
Since: 3.0.0
frequency
frequency: number
Description:
For a flow emitter, the time interval (>= 0) between particle flow cycles in ms. A value of 0 means there is one particle flow cycle for each logic update (the maximum flow frequency). This is the default setting. For an exploding emitter, this value will be -1. Calling Phaser.GameObjects.Particles.ParticleEmitter#flow also puts the emitter in flow mode (frequency >= 0). Calling Phaser.GameObjects.Particles.ParticleEmitter#explode also puts the emitter in explode mode (frequency = -1).
Source: src/gameobjects/particles/ParticleEmitter.js#L592
Since: 3.0.0
gravityX
gravityX: number
Description:
Horizontal acceleration applied to emitted particles, in pixels per second squared.
Source: src/gameobjects/particles/ParticleEmitter.js#L436
Since: 3.0.0
gravityY
gravityY: number
Description:
Vertical acceleration applied to emitted particles, in pixels per second squared.
Source: src/gameobjects/particles/ParticleEmitter.js#L447
Since: 3.0.0
hasPostPipeline
hasPostPipeline: boolean
Description:
Does this Game Object have any Post Pipelines set?
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.PostPipeline#hasPostPipeline
Source: src/gameobjects/components/PostPipeline.js#L21
Since: 3.60.0
hasTransformComponent
hasTransformComponent: boolean
Description:
A property indicating that a Game Object has this component.
Inherits: Phaser.GameObjects.Components.Transform#hasTransformComponent
Source: src/gameobjects/components/Transform.js#L26
Since: 3.60.0
hold
hold: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The number of milliseconds to wait after a particle has finished its life before it will be removed. This allows you to 'hold' a particle on the screen once it has reached its final state before it then vanishes.
Note that all particle updates will cease, including changing alpha, scale, movement or animation.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3660
Since: 3.60.0
ignoreDestroy
ignoreDestroy: boolean
Description:
This Game Object will ignore all calls made to its destroy method if this flag is set to true
.
This includes calls that may come from a Group, Container or the Scene itself.
While it allows you to persist a Game Object across Scenes, please understand you are entirely
responsible for managing references to and from this Game Object.
Inherits: Phaser.GameObjects.GameObject#ignoreDestroy
Source: src/gameobjects/GameObject.js#L196
Since: 3.5.0
input
input: Phaser.Types.Input.InteractiveObject
Description:
If this Game Object is enabled for input then this property will contain an InteractiveObject instance.
Not usually set directly. Instead call GameObject.setInteractive()
.
Inherits: Phaser.GameObjects.GameObject#input
Source: src/gameobjects/GameObject.js#L175
Since: 3.0.0
lifespan
lifespan: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The lifespan of the emitted particles. This value is given in milliseconds and defaults to 1000ms (1 second). When a particle reaches this amount it is killed.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3524
Since: 3.60.0
mask
mask: Phaser.Display.Masks.BitmapMask, Phaser.Display.Masks.GeometryMask
Description:
The Mask this Game Object is using during render.
Inherits: Phaser.GameObjects.Components.Mask#mask
Source: src/gameobjects/components/Mask.js#L19
Since: 3.0.0
maxAliveParticles
maxAliveParticles: number
Description:
The maximum number of alive and rendering particles this emitter will update. When this limit is reached, a particle needs to die before another can be emitted.
0 means no limits.
Source: src/gameobjects/particles/ParticleEmitter.js#L535
Since: 3.60.0
maxParticles
maxParticles: number
Description:
Set to hard limit the amount of particle objects this emitter is allowed to create
in total. This is the number of Particle
instances it can create, not the number
of 'alive' particles.
0 means unlimited.
Source: src/gameobjects/particles/ParticleEmitter.js#L521
Since: 3.0.0
maxVelocityX
maxVelocityX: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The maximum horizontal velocity emitted particles can reach, in pixels per second squared.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3142
Since: 3.60.0
maxVelocityY
maxVelocityY: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The maximum vertical velocity emitted particles can reach, in pixels per second squared.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3167
Since: 3.60.0
moveTo
moveTo: boolean
Description:
Whether moveToX and moveToY are set. Set automatically during configuration.
When true the particles move toward the moveToX and moveToY coordinates and arrive at the end of their life. Emitter angle, speedX, and speedY are ignored.
Source: src/gameobjects/particles/ParticleEmitter.js#L468
Since: 3.0.0
moveToX
moveToX: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The x coordinate emitted particles move toward, when Phaser.GameObjects.Particles.ParticleEmitter#moveTo is true.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3270
Since: 3.60.0
moveToY
moveToY: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The y coordinate emitted particles move toward, when Phaser.GameObjects.Particles.ParticleEmitter#moveTo is true.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3294
Since: 3.60.0
name
name: string
Description:
The name of this Game Object. Empty by default and never populated by Phaser, this is left for developers to use.
Inherits: Phaser.GameObjects.GameObject#name
Source: src/gameobjects/GameObject.js#L102
Since: 3.0.0
ops
ops: Phaser.Types.GameObjects.Particles.ParticleEmitterOps
Description:
An internal object holding all of the EmitterOp instances.
These are populated as part of the Emitter configuration parsing.
You typically do not access them directly, but instead use the
provided getters and setters on this class, such as ParticleEmitter.speedX
etc.
Source: src/gameobjects/particles/ParticleEmitter.js#L386
Since: 3.60.0
parentContainer
parentContainer: Phaser.GameObjects.Container
Description:
The parent Container of this Game Object, if it has one.
Inherits: Phaser.GameObjects.GameObject#parentContainer
Source: src/gameobjects/GameObject.js#L93
Since: 3.4.0
particleAlpha
particleAlpha: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The alpha value of the emitted particles. This is a value between 0 and 1. Particles with alpha zero are invisible and are therefore not rendered, but are still processed by the Emitter.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3497
Since: 3.60.0
particleAngle
particleAngle: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The angle at which the particles are emitted. The values are
given in degrees. This allows you to control the direction
of the emitter. If you wish instead to change the rotation
of the particles themselves, see the particleRotate
property.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3550
Since: 3.60.0
particleBringToTop
particleBringToTop: boolean
Description:
Newly emitted particles are added to the top of the particle list, i.e. rendered above those already alive.
Set to false to send them to the back.
Also see the sortOrder
property for more complex particle sorting.
Source: src/gameobjects/particles/ParticleEmitter.js#L621
Since: 3.0.0
particleClass
particleClass: function
Description:
The Particle Class which will be emitted by this Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L361
Since: 3.0.0
particleColor
particleColor: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
A color tint value that is applied to the texture of the emitted particle. The value should be given in hex format, i.e. 0xff0000 for a red tint, and should not include the alpha channel.
Tints are additive, meaning a tint value of white (0xffffff) will effectively reset the tint to nothing.
Modify the ParticleEmitter.tintFill
property to change between
an additive and replacement tint mode.
When you define the color via the Emitter config you should give
it as an array of color values. The Particle will then interpolate
through these colors over the course of its lifespan. Setting this
will override any tint
value that may also be given.
This is a WebGL only feature.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3396
Since: 3.60.0
particleRotate
particleRotate: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The rotation (or angle) of each particle when it is emitted. The value is given in degrees and uses a right-handed coordinate system, where 0 degrees points to the right, 90 degrees points down and -90 degrees points up.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3577
Since: 3.60.0
particleScaleX
particleScaleX: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The horizontal scale of emitted particles.
This is relative to the Emitters scale and that of any parent.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3344
Since: 3.60.0
particleScaleY
particleScaleY: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The vertical scale of emitted particles.
This is relative to the Emitters scale and that of any parent.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3370
Since: 3.60.0
particleTint
particleTint: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
A color tint value that is applied to the texture of the emitted particle. The value should be given in hex format, i.e. 0xff0000 for a red tint, and should not include the alpha channel.
Tints are additive, meaning a tint value of white (0xffffff) will effectively reset the tint to nothing.
Modify the ParticleEmitter.tintFill
property to change between
an additive and replacement tint mode.
The tint
value will be overriden if a color
array is provided.
This is a WebGL only feature.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3461
Since: 3.60.0
particleX
particleX: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType, Phaser.Types.GameObjects.Particles.EmitterOpOnUpdateType
Description:
The x coordinate the particles are emitted from.
This is relative to the Emitters x coordinate and that of any parent.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3042
Since: 3.60.0
particleY
particleY: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType, Phaser.Types.GameObjects.Particles.EmitterOpOnUpdateType
Description:
The y coordinate the particles are emitted from.
This is relative to the Emitters x coordinate and that of any parent.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3068
Since: 3.60.0
pipeline
pipeline: Phaser.Renderer.WebGL.WebGLPipeline
Description:
The current WebGL pipeline of this Game Object.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.Pipeline#pipeline
Source: src/gameobjects/components/Pipeline.js#L32
Since: 3.0.0
pipelineData
pipelineData: object
Description:
An object to store pipeline specific data in, to be read by the pipelines this Game Object uses.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.Pipeline#pipelineData
Source: src/gameobjects/components/Pipeline.js#L43
Since: 3.50.0
postFX
postFX: Phaser.GameObjects.Components.FX
Description:
The Post FX component of this Game Object.
This component allows you to apply a variety of built-in effects to this Game Object, such as glow, blur, bloom, displacements, vignettes and more. You access them via this property, for example:
const player = this.add.sprite();
player.postFX.addBloom();
All FX are WebGL only and do not have Canvas counterparts.
Please see the FX Class for more details and available methods.
This property is always null
until the initPostPipeline
method is called.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.PostPipeline#postFX
Source: src/gameobjects/components/PostPipeline.js#L88
Since: 3.60.0
postPipelineData
postPipelineData: object
Description:
An object to store pipeline specific data in, to be read by the pipelines this Game Object uses.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.PostPipeline#postPipelineData
Source: src/gameobjects/components/PostPipeline.js#L46
Since: 3.60.0
postPipelines
postPipelines: Array.<Phaser.Renderer.WebGL.Pipelines.PostFXPipeline>
Description:
The WebGL Post FX Pipelines this Game Object uses for post-render effects.
The pipelines are processed in the order in which they appear in this array.
If you modify this array directly, be sure to set the
hasPostPipeline
property accordingly.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.PostPipeline#postPipelines
Source: src/gameobjects/components/PostPipeline.js#L31
Since: 3.60.0
preFX
preFX: Phaser.GameObjects.Components.FX
Description:
The Pre FX component of this Game Object.
This component allows you to apply a variety of built-in effects to this Game Object, such as glow, blur, bloom, displacements, vignettes and more. You access them via this property, for example:
const player = this.add.sprite();
player.preFX.addBloom();
Only the following Game Objects support Pre FX:
- Image
- Sprite
- TileSprite
- Text
- RenderTexture
- Video
All FX are WebGL only and do not have Canvas counterparts.
Please see the FX Class for more details and available methods.
Tags:
- webglOnly
Inherits: Phaser.GameObjects.Components.PostPipeline#preFX
Source: src/gameobjects/components/PostPipeline.js#L56
Since: 3.60.0
processors
processors: Phaser.Structs.List.<Phaser.GameObjects.Particles.ParticleProcessor>
Description:
A list of Particle Processors being managed by this Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L890
Since: 3.60.0
quantity
quantity: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The number of particles that are emitted each time an emission occurs, i.e. from one 'explosion' or each frame in a 'flow' cycle.
The default is 1.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3604
Since: 3.60.0
radial
radial: boolean
Description:
A radial emitter will emit particles in all directions between angle min and max, using Phaser.GameObjects.Particles.ParticleEmitter#speed as the value. If set to false then this acts as a point Emitter. A point emitter will emit particles only in the direction derived from the speedX and speedY values.
Source: src/gameobjects/particles/ParticleEmitter.js#L423
Since: 3.0.0
randomAnim
randomAnim: boolean
Description:
Whether animations Phaser.GameObjects.Particles.ParticleEmitter#anims are selected at random.
Source: src/gameobjects/particles/ParticleEmitter.js#L773
Since: 3.60.0
randomFrame
randomFrame: boolean
Description:
Whether texture Phaser.GameObjects.Particles.ParticleEmitter#frames are selected at random.
Source: src/gameobjects/particles/ParticleEmitter.js#L742
Since: 3.0.0
renderFlags
renderFlags: number
Description:
The flags that are compared against RENDER_MASK
to determine if this Game Object will render or not.
The bits are 0001 | 0010 | 0100 | 1000 set by the components Visible, Alpha, Transform and Texture respectively.
If those components are not used by your custom class then you can use this bitmask as you wish.
Inherits: Phaser.GameObjects.GameObject#renderFlags
Source: src/gameobjects/GameObject.js#L148
Since: 3.0.0
rotation
rotation: number
Description:
The angle of this Game Object in radians.
Phaser uses a right-hand clockwise rotation system, where 0 is right, PI/2 is down, +-PI is left and -PI/2 is up.
If you prefer to work in degrees, see the angle
property instead.
Inherits: Phaser.GameObjects.Components.Transform#rotation
Source: src/gameobjects/components/Transform.js#L238
Since: 3.0.0
scale
scale: number
Description:
This is a special setter that allows you to set both the horizontal and vertical scale of this Game Object
to the same value, at the same time. When reading this value the result returned is (scaleX + scaleY) / 2
.
Use of this property implies you wish the horizontal and vertical scales to be equal to each other. If this
isn't the case, use the scaleX
or scaleY
properties instead.
Inherits: Phaser.GameObjects.Components.Transform#scale
Source: src/gameobjects/components/Transform.js#L113
Since: 3.18.0
scaleX
scaleX: number
Description:
The horizontal scale of this Game Object.
Inherits: Phaser.GameObjects.Components.Transform#scaleX
Source: src/gameobjects/components/Transform.js#L149
Since: 3.0.0
scaleY
scaleY: number
Description:
The vertical scale of this Game Object.
Inherits: Phaser.GameObjects.Components.Transform#scaleY
Source: src/gameobjects/components/Transform.js#L180
Since: 3.0.0
scene
scene: Phaser.Scene
Description:
A reference to the Scene to which this Game Object belongs.
Game Objects can only belong to one Scene.
You should consider this property as being read-only. You cannot move a Game Object to another Scene by simply changing it.
Inherits: Phaser.GameObjects.GameObject#scene
Source: src/gameobjects/GameObject.js#L39
Since: 3.0.0
scrollFactorX
scrollFactorX: number
Description:
The horizontal scroll factor of this Game Object.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken in to consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
Inherits: Phaser.GameObjects.Components.ScrollFactor#scrollFactorX
Source: src/gameobjects/components/ScrollFactor.js#L16
Since: 3.0.0
scrollFactorY
scrollFactorY: number
Description:
The vertical scroll factor of this Game Object.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken in to consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
Inherits: Phaser.GameObjects.Components.ScrollFactor#scrollFactorY
Source: src/gameobjects/components/ScrollFactor.js#L40
Since: 3.0.0
skipping
skipping: boolean
Description:
An internal property used to tell when the emitter is in fast-forwarc mode.
Source: src/gameobjects/particles/ParticleEmitter.js#L836
Since: 3.60.0
sortCallback
sortCallback: Phaser.Types.GameObjects.Particles.ParticleSortCallback
Description:
The callback used to sort the particles. Only used if sortProperty
has been set. Set this via the setSortCallback
method.
Source: src/gameobjects/particles/ParticleEmitter.js#L880
Since: 3.60.0
sortOrderAsc
sortOrderAsc: boolean
Description:
When sortProperty
is defined this controls the sorting order,
either ascending or descending. Toggle to control the visual effect.
Source: src/gameobjects/particles/ParticleEmitter.js#L870
Since: 3.60.0
sortProperty
sortProperty: string
Description:
Optionally sort the particles before they render based on this
property. The property must exist on the Particle
class, such
as y
, lifeT
, scaleX
, etc.
When set this overrides the particleBringToTop
setting.
To reset this and disable sorting, so this property to an empty string.
Source: src/gameobjects/particles/ParticleEmitter.js#L855
Since: 3.60.0
speed
speed: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The initial speed of emitted particles, in pixels per second.
If using this as a getter it will return the speedX
value.
If using it as a setter it will update both speedX
and speedY
to the
given value.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3192
Since: 3.60.0
speedX
speedX: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The initial horizontal speed of emitted particles, in pixels per second.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3222
Since: 3.60.0
speedY
speedY: Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType
Description:
The initial vertical speed of emitted particles, in pixels per second.
Accessing this property should typically return a number. However, it can be set to any valid EmitterOp onEmit type.
Source: src/gameobjects/particles/ParticleEmitter.js#L3246
Since: 3.60.0
state
state: number, string
Description:
The current state of this Game Object.
Phaser itself will never modify this value, although plugins may do so.
Use this property to track the state of a Game Object during its lifetime. For example, it could change from a state of 'moving', to 'attacking', to 'dead'. The state value should be an integer (ideally mapped to a constant in your game code), or a string. These are recommended to keep it light and simple, with fast comparisons. If you need to store complex data about your Game Object, look at using the Data Component instead.
Inherits: Phaser.GameObjects.GameObject#state
Source: src/gameobjects/GameObject.js#L77
Since: 3.16.0
stopAfter
stopAfter: number
Description:
If set, either via the Emitter config, or by directly setting this property,
the Particle Emitter will stop emitting particles once this total has been
reached. It will then enter a 'stopped' state, firing the STOP
event. Note that entering a stopped state doesn't mean all the particles
have finished, just that it's not emitting any further ones.
To know when the final particle expires, listen for the COMPLETE event.
Use this if you wish to launch an exact number of particles and then stop your emitter afterwards.
The counter is reset each time the ParticleEmitter.start
method is called.
0 means the emitter will not stop based on total emitted particles.
Source: src/gameobjects/particles/ParticleEmitter.js#L548
Since: 3.60.0
stopCounter
stopCounter: number
Description:
The internal stop counter.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3782
Since: 3.60.0
tabIndex
tabIndex: number
Description:
The Tab Index of the Game Object. Reserved for future use by plugins and the Input Manager.
Inherits: Phaser.GameObjects.GameObject#tabIndex
Source: src/gameobjects/GameObject.js#L125
Since: 3.0.0
texture
texture: Phaser.Textures.Texture, Phaser.Textures.CanvasTexture
Description:
The Texture this Game Object is using to render with.
Inherits: Phaser.GameObjects.Components.Texture#texture
Source: src/gameobjects/components/Texture.js#L21
Since: 3.0.0
timeScale
timeScale: number
Description:
The time rate applied to active particles, affecting lifespan, movement, and tweens. Values larger than 1 are faster than normal.
Source: src/gameobjects/particles/ParticleEmitter.js#L635
Since: 3.0.0
tintFill
tintFill: boolean
Description:
The tint fill mode used by the Particles in this Emitter.
false
= An additive tint (the default), where vertices colors are blended with the texture.
true
= A fill tint, where the vertices colors replace the texture, but respects texture alpha.
Source: src/gameobjects/particles/ParticleEmitter.js#L899
Since: 3.60.0
trackVisible
trackVisible: boolean
Description:
Whether the emitter's Phaser.GameObjects.Particles.ParticleEmitter#visible state will track the Phaser.GameObjects.Particles.ParticleEmitter#follow target's visibility state.
Source: src/gameobjects/particles/ParticleEmitter.js#L721
Since: 3.0.0
type
type: string
Description:
A textual representation of this Game Object, i.e. sprite
.
Used internally by Phaser but is available for your own custom classes to populate.
Inherits: Phaser.GameObjects.GameObject#type
Source: src/gameobjects/GameObject.js#L67
Since: 3.0.0
viewBounds
viewBounds: Phaser.Geom.Rectangle
Description:
An optional Rectangle object that is used during rendering to cull Particles from display. For example, if your particles are limited to only move within a 300x300 sized area from their origin, then you can set this Rectangle to those dimensions.
The renderer will check to see if the viewBounds
Rectangle intersects with the
Camera bounds during the render step and if not it will skip rendering the Emitter
entirely.
This allows you to create many emitters in a Scene without the cost of rendering if the contents aren't visible.
Note that the Emitter will not perform any checks to see if the Particles themselves
are outside of these bounds, or not. It will simply check the bounds against the
camera. Use the getBounds
method with the advance
parameter to help define
the location and placement of the view bounds.
Source: src/gameobjects/particles/ParticleEmitter.js#L674
Since: 3.60.0
visible
visible: boolean
Description:
The visible state of the Game Object.
An invisible Game Object will skip rendering, but will still process update logic.
Inherits: Phaser.GameObjects.Components.Visible#visible
Source: src/gameobjects/components/Visible.js#L31
Since: 3.0.0
w
w: number
Description:
The w position of this Game Object.
Inherits: Phaser.GameObjects.Components.Transform#w
Source: src/gameobjects/components/Transform.js#L103
Since: 3.0.0
worldMatrix
worldMatrix: Phaser.GameObjects.Components.TransformMatrix
Description:
An internal Transform Matrix used to cache this emitters world matrix.
Source: src/gameobjects/particles/ParticleEmitter.js#L846
Since: 3.60.0
x
x: number
Description:
The x position of this Game Object.
Inherits: Phaser.GameObjects.Components.Transform#x
Source: src/gameobjects/components/Transform.js#L70
Since: 3.0.0
y
y: number
Description:
The y position of this Game Object.
Inherits: Phaser.GameObjects.Components.Transform#y
Source: src/gameobjects/components/Transform.js#L80
Since: 3.0.0
z
z: number
Description:
The z position of this Game Object.
Note: The z position does not control the rendering order of 2D Game Objects. Use Phaser.GameObjects.Components.Depth#depth instead.
Inherits: Phaser.GameObjects.Components.Transform#z
Source: src/gameobjects/components/Transform.js#L90
Since: 3.0.0
zoneIndex
zoneIndex: number
Description:
The internal zone index.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3828
Since: 3.60.0
zoneTotal
zoneTotal: number
Description:
The internal zone total.
Treat this property as read-only.
Source: src/gameobjects/particles/ParticleEmitter.js#L3851
Since: 3.60.0
Private Members
_alpha
_alpha: number
Description:
Private internal value. Holds the global alpha value.
Access: private
Inherits: Phaser.GameObjects.Components.AlphaSingle#_alpha
Source: src/gameobjects/components/AlphaSingle.js#L22
Since: 3.0.0
_blendMode
_blendMode: number
Description:
Private internal value. Holds the current blend mode.
Access: private
Inherits: Phaser.GameObjects.Components.BlendMode#_blendMode
Source: src/gameobjects/components/BlendMode.js#L19
Since: 3.0.0
_depth
_depth: number
Description:
Private internal value. Holds the depth of the Game Object.
Access: private
Inherits: Phaser.GameObjects.Components.Depth#_depth
Source: src/gameobjects/components/Depth.js#L19
Since: 3.0.0
_rotation
_rotation: number
Description:
Private internal value. Holds the rotation value in radians.
Access: private
Inherits: Phaser.GameObjects.Components.Transform#_rotation
Source: src/gameobjects/components/Transform.js#L59
Since: 3.0.0
_scaleX
_scaleX: number
Description:
Private internal value. Holds the horizontal scale value.
Access: private
Inherits: Phaser.GameObjects.Components.Transform#_scaleX
Source: src/gameobjects/components/Transform.js#L37
Since: 3.0.0
_scaleY
_scaleY: number
Description:
Private internal value. Holds the vertical scale value.
Access: private
Inherits: Phaser.GameObjects.Components.Transform#_scaleY
Source: src/gameobjects/components/Transform.js#L48
Since: 3.0.0
_visible
_visible: boolean
Description:
Private internal value. Holds the visible value.
Access: private
Inherits: Phaser.GameObjects.Components.Visible#_visible
Source: src/gameobjects/components/Visible.js#L20
Since: 3.0.0
alive
alive: Array.<Phaser.GameObjects.Particles.Particle>
Description:
An array containing all currently live and rendering Particle instances.
Access: private
Source: src/gameobjects/particles/ParticleEmitter.js#L805
Since: 3.0.0
counters
counters: Float32Array
Description:
Internal array that holds counter data:
0 - flowCounter - The time until next flow cycle.
1 - frameCounter - Counts up to Phaser.GameObjects.Particles.ParticleEmitter#frameQuantity.
2 - animCounter - Counts up to animQuantity.
3 - elapsed - The time remaining until the duration
limit is reached.
4 - stopCounter - The number of particles remaining until stopAfter
limit is reached.
5 - completeFlag - Has the COMPLETE event been emitted?
6 - zoneIndex - The emit zone index counter.
7 - zoneTotal - The emit zone total counter.
8 - currentFrame - The current texture frame, as an index of Phaser.GameObjects.Particles.ParticleEmitter#frames.
9 - currentAnim - The current animation, as an index of Phaser.GameObjects.Particles.ParticleEmitter#anims.
Access: private
Source: src/gameobjects/particles/ParticleEmitter.js#L815
Since: 3.60.0
dead
dead: Array.<Phaser.GameObjects.Particles.Particle>
Description:
An array containing all currently inactive Particle instances.
Access: private
Source: src/gameobjects/particles/ParticleEmitter.js#L795
Since: 3.0.0
isCropped
isCropped: boolean
Description:
Internal flag. Not to be set by this Game Object.
Access: private
Inherits: Phaser.GameObjects.Components.Texture#isCropped
Source: src/gameobjects/components/Texture.js#L39
Since: 3.11.0
Public Methods
addDeathZone
<instance> addDeathZone(config)
Description:
Adds a new Particle Death Zone to this Emitter.
A particle is immediately killed as soon as its x/y coordinates intersect with any of the configured Death Zones.
The source
can be a Geometry Shape, such as a Circle, Rectangle or Triangle.
Any valid object from the Phaser.Geometry
namespace is allowed, as long as
it supports a contains
function. You can set the type
to be either onEnter
or onLeave
.
A single Death Zone instance can only exist once within this Emitter, but can belong to multiple Emitters.
Parameters:
name | type | optional | description |
---|---|---|---|
config | Phaser.Types.GameObjects.Particles.DeathZoneObject | Array.<Phaser.Types.GameObjects.Particles.DeathZoneObject> | No | A Death Zone configuration object, a Death Zone instance, a valid Geometry object or an array of them. |
Returns: Array.<Phaser.GameObjects.Particles.Zones.DeathZone> - An array of the Death Zones that were added to this Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1703
Since: 3.60.0
addedToScene
<instance> addedToScene()
Description:
This callback is invoked when this Game Object is added to a Scene.
Can be overriden by custom Game Objects, but be aware of some Game Objects that will use this, such as Sprites, to add themselves into the Update List.
You can also listen for the ADDED_TO_SCENE
event from this Game Object.
Inherits: Phaser.GameObjects.GameObject#addedToScene
Source: src/gameobjects/GameObject.js#L562
Since: 3.50.0
addEmitZone
<instance> addEmitZone(zone)
Description:
Adds a new Particle Emission Zone to this Emitter.
An EdgeZone places particles on its edges. Its source can be a Curve, Path, Circle, Ellipse, Line, Polygon, Rectangle, or Triangle; or any object with a suitable getPoints method.
A RandomZone places the particles randomly within its interior. Its source can be a Circle, Ellipse, Line, Polygon, Rectangle, or Triangle; or any object with a suitable getRandomPoint method.
An Emission Zone can only exist once within this Emitter.
Parameters:
name | type | optional | description |
---|---|---|---|
zone | Phaser.Types.GameObjects.Particles.EmitZoneData | Array.<Phaser.Types.GameObjects.Particles.EmitZoneData> | No | An Emission Zone configuration object, a RandomZone or EdgeZone instance, or an array of them. |
Returns: Array.<Phaser.Types.GameObjects.Particles.EmitZoneObject> - An array of the Emission Zones that were added to this Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1801
Since: 3.60.0
addListener
<instance> addListener(event, fn, [context])
Description:
Add a listener for a given event.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
event | string | symbol | No | The event name. | |
fn | function | No | The listener function. | |
context | * | Yes | "this" | The context to invoke the listener with. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - this
.
Inherits: Phaser.Events.EventEmitter#addListener
Source: src/events/EventEmitter.js#L111
Since: 3.0.0
addParticleBounds
<instance> addParticleBounds(x, [y], [width], [height], [collideLeft], [collideRight], [collideTop], [collideBottom])
Description:
Creates a Particle Bounds processor and adds it to this Emitter.
This processor will check to see if any of the active Particles hit the defined boundary, as specified by a Rectangle shape in world-space.
If so, they are 'rebounded' back again by having their velocity adjusted.
The strength of the rebound is controlled by the Particle.bounce
property.
You should be careful to ensure that you emit particles within a bounds, if set, otherwise it will lead to unpredictable visual results as the particles are hastily repositioned.
The Particle Bounds processor is returned from this method. If you wish
to modify the area you can directly change its bounds
property, along
with the collideLeft
etc values.
To disable the bounds you can either set its active
property to false
,
or if you no longer require it, call ParticleEmitter.removeParticleProcessor
.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | Phaser.Types.GameObjects.Particles.ParticleEmitterBounds | No | ||
y | number | Yes | The y-coordinate of the top edge of the boundary. | |
width | number | Yes | The width of the boundary. | |
height | number | Yes | The height of the boundary. | |
collideLeft | boolean | Yes | true | Whether particles interact with the left edge of the bounds. |
collideRight | boolean | Yes | true | Whether particles interact with the right edge of the bounds. |
collideTop | boolean | Yes | true | Whether particles interact with the top edge of the bounds. |
collideBottom | boolean | Yes | true | Whether particles interact with the bottom edge of the bounds. |
Returns: Phaser.GameObjects.Particles.ParticleBounds - The Particle Bounds processor.
Source: src/gameobjects/particles/ParticleEmitter.js#L1457
Since: 3.60.0
addParticleProcessor
<instance> addParticleProcessor(processor)
Description:
Adds a Particle Processor, such as a Gravity Well, to this Emitter.
It will start processing particles from the next update as long as its active
property is set.
Tags:
- generic
Parameters:
name | type | optional | description |
---|---|---|---|
processor | T | No | The Particle Processor to add to this Emitter Manager. |
Returns: T - The Particle Processor that was added to this Emitter Manager.
Source: src/gameobjects/particles/ParticleEmitter.js#L2032
Since: 3.60.0
addToDisplayList
<instance> addToDisplayList([displayList])
Description:
Adds this Game Object to the given Display List.
If no Display List is specified, it will default to the Display List owned by the Scene to which this Game Object belongs.
A Game Object can only exist on one Display List at any given time, but may move freely between them.
If this Game Object is already on another Display List when this method is called, it will first be removed from it, before being added to the new list.
You can query which list it is on by looking at the Phaser.GameObjects.GameObject#displayList
property.
If a Game Object isn't on any display list, it will not be rendered. If you just wish to temporarly
disable it from rendering, consider using the setVisible
method, instead.
Parameters:
name | type | optional | description |
---|---|---|---|
displayList | Yes | The Display List to add to. Defaults to the Scene Display List. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object.
Fires: Phaser.Scenes.Events#event:ADDED_TO_SCENE, Phaser.GameObjects.Events#event:ADDED_TO_SCENE
Inherits: Phaser.GameObjects.GameObject#addToDisplayList
Source: src/gameobjects/GameObject.js#L684
Since: 3.53.0
addToUpdateList
<instance> addToUpdateList()
Description:
Adds this Game Object to the Update List belonging to the Scene.
When a Game Object is added to the Update List it will have its preUpdate
method called
every game frame. This method is passed two parameters: delta
and time
.
If you wish to run your own logic within preUpdate
then you should always call
super.preUpdate(delta, time)
within it, or it may fail to process required operations,
such as Sprite animations.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object.
Inherits: Phaser.GameObjects.GameObject#addToUpdateList
Source: src/gameobjects/GameObject.js#L735
Since: 3.53.0
atLimit
<instance> atLimit()
Description:
Whether this emitter is at either its hard-cap limit (maxParticles), if set, or the max allowed number of 'alive' particles (maxAliveParticles).
Returns: boolean - Returns true
if this Emitter is at its limit, or false
if no limit, or below the maxParticles
level.
Source: src/gameobjects/particles/ParticleEmitter.js#L2193
Since: 3.0.0
clearAlpha
<instance> clearAlpha()
Description:
Clears all alpha values associated with this Game Object.
Immediately sets the alpha levels back to 1 (fully opaque).
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.AlphaSingle#clearAlpha
Source: src/gameobjects/components/AlphaSingle.js#L33
Since: 3.0.0
clearDeathZones
<instance> clearDeathZones()
Description:
Clear all Death Zones from this Particle Emitter.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1786
Since: 3.70.0
clearEmitZones
<instance> clearEmitZones()
Description:
Clear all Emission Zones from this Particle Emitter.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1896
Since: 3.70.0
clearFX
<instance> clearFX()
Description:
Removes all Pre and Post FX Controllers from this Game Object.
If you wish to remove a single controller, use the preFX.remove(fx)
or postFX.remove(fx)
methods instead.
If you wish to clear a single controller, use the preFX.clear()
or postFX.clear()
methods instead.
Tags:
- webglOnly
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object.
Inherits: Phaser.GameObjects.Components.PostPipeline#clearFX
Source: src/gameobjects/components/PostPipeline.js#L337
Since: 3.60.0
clearMask
<instance> clearMask([destroyMask])
Description:
Clears the mask that this Game Object was using.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
destroyMask | boolean | Yes | false | Destroy the mask before clearing it? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Mask#clearMask
Source: src/gameobjects/components/Mask.js#L56
Since: 3.6.2
copyPosition
<instance> copyPosition(source)
Description:
Copies an object's coordinates to this Game Object's position.
Parameters:
name | type | optional | description |
---|---|---|---|
source | Phaser.Types.Math.Vector2Like | Phaser.Types.Math.Vector3Like | No |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#copyPosition
Source: src/gameobjects/components/Transform.js#L293
Since: 3.50.0
createBitmapMask
<instance> createBitmapMask([maskObject], [x], [y], [texture], [frame])
Description:
Creates and returns a Bitmap Mask. This mask can be used by any Game Object, including this one, or a Dynamic Texture.
Note: Bitmap Masks only work on WebGL. Geometry Masks work on both WebGL and Canvas.
To create the mask you need to pass in a reference to a renderable Game Object. A renderable Game Object is one that uses a texture to render with, such as an Image, Sprite, Render Texture or BitmapText.
If you do not provide a renderable object, and this Game Object has a texture, it will use itself as the object. This means you can call this method to create a Bitmap Mask from any renderable texture-based Game Object.
Tags:
- generic
- generic
- genericUse
Parameters:
name | type | optional | description |
---|---|---|---|
maskObject | Phaser.GameObjects.GameObject | Phaser.Textures.DynamicTexture | Yes | The Game Object or Dynamic Texture that will be used as the mask. If |
x | number | Yes | If creating a Game Object, the horizontal position in the world. |
y | number | Yes | If creating a Game Object, the vertical position in the world. |
texture | string | Phaser.Textures.Texture | Yes | If creating a Game Object, the key, or instance of the Texture it will use to render with, as stored in the Texture Manager. |
frame | string | number | Yes |
Returns: Phaser.Display.Masks.BitmapMask - This Bitmap Mask that was created.
Inherits: Phaser.GameObjects.Components.Mask#createBitmapMask
Source: src/gameobjects/components/Mask.js#L80
Since: 3.6.2
createEmitter
<instance> createEmitter()
Description:
Prints a warning to the console if you mistakenly call this function thinking it works the same way as Phaser v3.55.
Source: src/gameobjects/particles/ParticleEmitter.js#L3030
Since: 3.60.0
createGeometryMask
<instance> createGeometryMask([graphics])
Description:
Creates and returns a Geometry Mask. This mask can be used by any Game Object, including this one.
To create the mask you need to pass in a reference to a Graphics Game Object.
If you do not provide a graphics object, and this Game Object is an instance of a Graphics object, then it will use itself to create the mask.
This means you can call this method to create a Geometry Mask from any Graphics Game Object.
Tags:
- generic
- generic
- genericUse
Parameters:
name | type | optional | description |
---|---|---|---|
graphics | Yes | A Graphics Game Object, or any kind of Shape Game Object. The geometry within it will be used as the mask. |
Returns: Phaser.Display.Masks.GeometryMask - This Geometry Mask that was created.
Inherits: Phaser.GameObjects.Components.Mask#createGeometryMask
Source: src/gameobjects/components/Mask.js#L120
Since: 3.6.2
createGravityWell
<instance> createGravityWell(config)
Description:
Creates a new Gravity Well, adds it to this Emitter and returns a reference to it.
Parameters:
name | type | optional | description |
---|---|---|---|
config | No | Configuration settings for the Gravity Well to create. |
Returns: Phaser.GameObjects.Particles.GravityWell - The Gravity Well that was created.
Source: src/gameobjects/particles/ParticleEmitter.js#L2104
Since: 3.60.0
depthSort
<instance> depthSort()
Description:
Sorts active particles with Phaser.GameObjects.Particles.ParticleEmitter#depthSortCallback.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2530
Since: 3.0.0
depthSortCallback
<instance> depthSortCallback(a, b)
Description:
Calculates the difference of two particles, for sorting them by depth.
Parameters:
name | type | optional | description |
---|---|---|---|
a | object | No | The first particle. |
b | object | No | The second particle. |
Returns: number - The difference of a and b's y coordinates.
Source: src/gameobjects/particles/ParticleEmitter.js#L2545
Since: 3.0.0
destroy
<instance> destroy([fromScene])
Description:
Destroys this Game Object removing it from the Display List and Update List and severing all ties to parent resources.
Also removes itself from the Input Manager and Physics Manager if previously enabled.
Use this to remove a Game Object from your game if you don't ever plan to use it again. As long as no reference to it exists within your own code it should become free for garbage collection by the browser.
If you just want to temporarily disable an object then look at using the Game Object Pool instead of destroying it, as destroyed objects cannot be resurrected.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
fromScene | boolean | Yes | false |
|
Fires: Phaser.GameObjects.Events#event:DESTROY
Inherits: Phaser.GameObjects.GameObject#destroy
Source: src/gameobjects/GameObject.js#L855
Since: 3.0.0
disableInteractive
<instance> disableInteractive([resetCursor])
Description:
If this Game Object has previously been enabled for input, this will disable it.
An object that is disabled for input stops processing or being considered for
input events, but can be turned back on again at any time by simply calling
setInteractive()
with no arguments provided.
If want to completely remove interaction from this Game Object then use removeInteractive
instead.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
resetCursor | boolean | Yes | false | Should the currently active Input cursor, if any, be reset to the default cursor? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#disableInteractive
Source: src/gameobjects/GameObject.js#L494
Since: 3.7.0
emit
<instance> emit(event, [args])
Description:
Calls each of the listeners registered for a given event.
Parameters:
name | type | optional | description |
---|---|---|---|
event | string | symbol | No | The event name. |
args | * | Yes | Additional arguments that will be passed to the event handler. |
Returns: boolean - true
if the event had listeners, else false
.
Inherits: Phaser.Events.EventEmitter#emit
Source: src/events/EventEmitter.js#L86
Since: 3.0.0
emitParticle
<instance> emitParticle([count], [x], [y])
Description:
Emits particles at a given position (or the emitters current position).
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
count | number | Yes | "this.quantity" | The number of Particles to emit. |
x | number | Yes | "this.x" | The x coordinate to emit the Particles from. |
y | number | Yes | "this.x" | The y coordinate to emit the Particles from. |
Returns: Phaser.GameObjects.Particles.Particle, undefined - The most recently emitted Particle, or undefined
if the emitter is at its limit.
Source: src/gameobjects/particles/ParticleEmitter.js#L2646
Since: 3.0.0
emitParticleAt
<instance> emitParticleAt([x], [y], [count])
Description:
Emits particles at the given position. If no position is given, it will emit from this Emitters current location.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | Yes | "this.x" | The x coordinate to emit the Particles from. |
y | number | Yes | "this.x" | The y coordinate to emit the Particles from. |
count | number | Yes | "this.quantity" | The number of Particles to emit. |
Returns: Phaser.GameObjects.Particles.Particle, undefined - The most recently emitted Particle, or undefined
if the emitter is at its limit.
Source: src/gameobjects/particles/ParticleEmitter.js#L2628
Since: 3.0.0
eventNames
<instance> eventNames()
Description:
Return an array listing the events for which the emitter has registered listeners.
Returns: Array.<(string | symbol)> - undefined
Inherits: Phaser.Events.EventEmitter#eventNames
Source: src/events/EventEmitter.js#L55
Since: 3.0.0
explode
<instance> explode([count], [x], [y])
Description:
Puts the emitter in explode mode (frequency = -1), stopping any current particle flow, and emits several particles all at once.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
count | number | Yes | "this.quantity" | The number of Particles to emit. |
x | number | Yes | "this.x" | The x coordinate to emit the Particles from. |
y | number | Yes | "this.x" | The y coordinate to emit the Particles from. |
Returns: Phaser.GameObjects.Particles.Particle, undefined - The most recently emitted Particle, or undefined
if the emitter is at its limit.
Fires: Phaser.GameObjects.Particles.Events#event:EXPLODE
Source: src/gameobjects/particles/ParticleEmitter.js#L2602
Since: 3.0.0
fastForward
<instance> fastForward(time, [delta])
Description:
Fast forwards this Particle Emitter and all of its particles.
Works by running the Emitter preUpdate
handler in a loop until the time
has been reached at delta
steps per loop.
All callbacks and emitter related events that would normally be fired will still be invoked.
You can make an emitter 'fast forward' via the emitter config using the
advance
property. Set this value to the number of ms you wish the
emitter to be fast-forwarded by. Or, call this method post-creation.
Parameters:
name | type | optional | description |
---|---|---|---|
time | number | No | The number of ms to advance the Particle Emitter by. |
delta | number | Yes | The amount of delta to use for each step. Defaults to 1000 / 60. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2727
Since: 3.60.0
flow
<instance> flow(frequency, [count], [stopAfter])
Description:
Puts the emitter in flow mode (frequency >= 0) and starts (or restarts) a particle flow.
To resume a flow at the current frequency and quantity, use Phaser.GameObjects.Particles.ParticleEmitter#start instead.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
frequency | number | No | The time interval (>= 0) of each flow cycle, in ms. | |
count | Yes | 1 | The number of particles to emit at each flow cycle. | |
stopAfter | number | Yes | Stop this emitter from firing any more particles once this value is reached. Set to zero for unlimited. Setting this parameter will override any |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Fires: Phaser.GameObjects.Particles.Events#event:START
Source: src/gameobjects/particles/ParticleEmitter.js#L2570
Since: 3.0.0
forEachAlive
<instance> forEachAlive(callback, context)
Description:
Calls a function for each active particle in this emitter. The function is sent two parameters: a reference to the Particle instance and to this Emitter.
Parameters:
name | type | optional | description |
---|---|---|---|
callback | No | The function. | |
context | * | No | The functions calling context. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2299
Since: 3.0.0
forEachDead
<instance> forEachDead(callback, context)
Description:
Calls a function for each inactive particle in this emitter.
Parameters:
name | type | optional | description |
---|---|---|---|
callback | No | The function. | |
context | * | No | The functions calling context. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2325
Since: 3.0.0
getAliveParticleCount
<instance> getAliveParticleCount()
Description:
Gets the number of active (in-use) particles in this emitter.
Returns: number - The number of particles with active=true
.
Source: src/gameobjects/particles/ParticleEmitter.js#L2154
Since: 3.0.0
getAnim
<instance> getAnim()
Description:
Chooses an animation from Phaser.GameObjects.Particles.ParticleEmitter#anims, if populated.
Returns: string - The animation to play, or null
if there aren't any.
Source: src/gameobjects/particles/ParticleEmitter.js#L1332
Since: 3.60.0
getBounds
<instance> getBounds([padding], [advance], [delta], [output])
Description:
Returns a bounds Rectangle calculated from the bounds of all currently
active Particles in this Emitter. If this Emitter has only just been
created and not yet rendered, then calling this method will return a Rectangle
with a max safe integer for dimensions. Use the advance
parameter to
avoid this.
Typically it takes a few seconds for a flow Emitter to 'warm up'. You can
use the advance
and delta
parameters to force the Emitter to
'fast forward' in time to try and allow the bounds to be more accurate,
as it will calculate the bounds based on the particle bounds across all
timesteps, giving a better result.
You can also use the padding
parameter to increase the size of the
bounds. Emitters with a lot of randomness in terms of direction or lifespan
can often return a bounds smaller than their possible maximum. By using
the padding
(and advance
if needed) you can help limit this.
Parameters:
name | type | optional | description |
---|---|---|---|
padding | number | Yes | The amount of padding, in pixels, to add to the bounds Rectangle. |
advance | number | Yes | The number of ms to advance the Particle Emitter by. Defaults to 0, i.e. not used. |
delta | number | Yes | The amount of delta to use for each step. Defaults to 1000 / 60. |
output | Yes | The Rectangle to store the results in. If not given a new one will be created. |
Returns: Phaser.Geom.Rectangle - A Rectangle containing the calculated bounds of this Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2928
Since: 3.60.0
getData
<instance> getData(key)
Description:
Retrieves the value for the given key in this Game Objects Data Manager, or undefined if it doesn't exist.
You can also access values via the values
object. For example, if you had a key called gold
you can do either:
sprite.getData('gold');
Or access the value directly:
sprite.data.values.gold;
You can also pass in an array of keys, in which case an array of values will be returned:
sprite.getData([ 'gold', 'armor', 'health' ]);
This approach is useful for destructuring arrays in ES6.
Parameters:
name | type | optional | description |
---|---|---|---|
key | string | Array.<string> | No | The key of the value to retrieve, or an array of keys. |
Returns: * - The value belonging to the given key, or an array of values, the order of which will match the input array.
Inherits: Phaser.GameObjects.GameObject#getData
Source: src/gameobjects/GameObject.js#L416
Since: 3.0.0
getDeadParticleCount
<instance> getDeadParticleCount()
Description:
Gets the number of inactive (available) particles in this emitter.
Returns: number - The number of particles with active=false
.
Source: src/gameobjects/particles/ParticleEmitter.js#L2167
Since: 3.0.0
getDeathZone
<instance> getDeathZone(particle)
Description:
Takes the given particle and checks to see if any of the configured Death Zones
will kill it and returns the result. This method is called automatically as part
of the Particle.update
process.
Parameters:
name | type | optional | description |
---|---|---|---|
particle | No | The particle to test against the Death Zones. |
Returns: boolean - true
if the particle should be killed, otherwise false
.
Fires: Phaser.GameObjects.Particles.Events#event:DEATH_ZONE
Source: src/gameobjects/particles/ParticleEmitter.js#L1960
Since: 3.60.0
getDisplayList
<instance> getDisplayList()
Description:
Returns a reference to the underlying display list array that contains this Game Object, which will be either the Scene's Display List or the internal list belonging to its parent Container, if it has one.
If this Game Object is not on a display list or in a container, it will return null
.
You should be very careful with this method, and understand that it returns a direct reference to the internal array used by the Display List. Mutating this array directly can cause all kinds of subtle and difficult to debug issues in your game.
Returns: Array.<Phaser.GameObjects.GameObject> - The internal Display List array of Game Objects, or null
.
Inherits: Phaser.GameObjects.GameObject#getDisplayList
Source: src/gameobjects/GameObject.js#L823
Since: 3.85.0
getEmitZone
<instance> getEmitZone(particle)
Description:
Takes the given particle and sets its x/y coordinates to match the next available
emission zone, if any have been configured. This method is called automatically
as part of the Particle.fire
process.
The Emit Zones are iterated in sequence. Once a zone has had a particle emitted from it, then the next zone is used and so on, in a loop.
Parameters:
name | type | optional | description |
---|---|---|---|
particle | No | The particle to set the emission zone for. |
Source: src/gameobjects/particles/ParticleEmitter.js#L1913
Since: 3.60.0
getFrame
<instance> getFrame()
Description:
Chooses a texture frame from Phaser.GameObjects.Particles.ParticleEmitter#frames.
Returns: Phaser.Textures.Frame - The texture frame.
Source: src/gameobjects/particles/ParticleEmitter.js#L1221
Since: 3.0.0
getIndexList
<instance> getIndexList()
Description:
Returns an array containing the display list index of either this Game Object, or if it has one, its parent Container. It then iterates up through all of the parent containers until it hits the root of the display list (which is index 0 in the returned array).
Used internally by the InputPlugin but also useful if you wish to find out the display depth of this Game Object and all of its ancestors.
Returns: Array.<number> - An array of display list position indexes.
Inherits: Phaser.GameObjects.GameObject#getIndexList
Source: src/gameobjects/GameObject.js#L635
Since: 3.4.0
getLocalPoint
<instance> getLocalPoint(x, y, [point], [camera])
Description:
Takes the given x
and y
coordinates and converts them into local space for this
Game Object, taking into account parent and local transforms, and the Display Origin.
The returned Vector2 contains the translated point in its properties.
A Camera needs to be provided in order to handle modified scroll factors. If no
camera is specified, it will use the main
camera from the Scene to which this
Game Object belongs.
Parameters:
name | type | optional | description |
---|---|---|---|
x | number | No | The x position to translate. |
y | number | No | The y position to translate. |
point | Yes | A Vector2, or point-like object, to store the results in. | |
camera | Yes | The Camera which is being tested against. If not given will use the Scene default camera. |
Returns: Phaser.Math.Vector2 - The translated point.
Inherits: Phaser.GameObjects.Components.Transform#getLocalPoint
Source: src/gameobjects/components/Transform.js#L542
Since: 3.50.0
getLocalTransformMatrix
<instance> getLocalTransformMatrix([tempMatrix])
Description:
Gets the local transform matrix for this Game Object.
Parameters:
name | type | optional | description |
---|---|---|---|
tempMatrix | Yes | The matrix to populate with the values from this Game Object. |
Returns: Phaser.GameObjects.Components.TransformMatrix - The populated Transform Matrix.
Inherits: Phaser.GameObjects.Components.Transform#getLocalTransformMatrix
Source: src/gameobjects/components/Transform.js#L484
Since: 3.4.0
getParentRotation
<instance> getParentRotation()
Description:
Gets the sum total rotation of all of this Game Objects parent Containers.
The returned value is in radians and will be zero if this Game Object has no parent container.
Returns: number - The sum total rotation, in radians, of all parent containers of this Game Object.
Inherits: Phaser.GameObjects.Components.Transform#getParentRotation
Source: src/gameobjects/components/Transform.js#L592
Since: 3.18.0
getParticleCount
<instance> getParticleCount()
Description:
Gets the total number of particles in this emitter.
Returns: number - The number of particles, including both alive and dead.
Source: src/gameobjects/particles/ParticleEmitter.js#L2180
Since: 3.0.0
getPipelineName
<instance> getPipelineName()
Description:
Gets the name of the WebGL Pipeline this Game Object is currently using.
Tags:
- webglOnly
Returns: string - The string-based name of the pipeline being used by this Game Object, or null.
Inherits: Phaser.GameObjects.Components.Pipeline#getPipelineName
Source: src/gameobjects/components/Pipeline.js#L201
Since: 3.0.0
getPostPipeline
<instance> getPostPipeline(pipeline)
Description:
Gets a Post Pipeline instance from this Game Object, based on the given name, and returns it.
Tags:
- webglOnly
Parameters:
name | type | optional | description |
---|---|---|---|
pipeline | string | function | No |
Returns: Phaser.Renderer.WebGL.Pipelines.PostFXPipeline, Array.<Phaser.Renderer.WebGL.Pipelines.PostFXPipeline> - An array of all the Post Pipelines matching the name. This array will be empty if there was no match. If there was only one single match, that pipeline is returned directly, not in an array.
Inherits: Phaser.GameObjects.Components.PostPipeline#getPostPipeline
Source: src/gameobjects/components/PostPipeline.js#L237
Since: 3.60.0
getProcessors
<instance> getProcessors()
Description:
Gets all active Particle Processors.
Returns: Array.<Phaser.GameObjects.Particles.ParticleProcessor> - - An array of active Particle Processors.
Source: src/gameobjects/particles/ParticleEmitter.js#L2091
Since: 3.60.0
getWorldTransformMatrix
<instance> getWorldTransformMatrix([tempMatrix], [parentMatrix])
Description:
Gets the world transform matrix for this Game Object, factoring in any parent Containers.
Parameters:
name | type | optional | description |
---|---|---|---|
tempMatrix | Yes | The matrix to populate with the values from this Game Object. | |
parentMatrix | Yes | A temporary matrix to hold parent values during the calculations. |
Returns: Phaser.GameObjects.Components.TransformMatrix - The populated Transform Matrix.
Inherits: Phaser.GameObjects.Components.Transform#getWorldTransformMatrix
Source: src/gameobjects/components/Transform.js#L501
Since: 3.4.0
incData
<instance> incData(key, [amount])
Description:
Increase a value for the given key within this Game Objects Data Manager. If the key doesn't already exist in the Data Manager then it is increased from 0.
If the Game Object has not been enabled for data (via setDataEnabled
) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
When the value is first set, a setdata
event is emitted from this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
key | string | No | The key to change the value for. | |
amount | number | Yes | 1 | The amount to increase the given key by. Pass a negative value to decrease the key. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#incData
Source: src/gameobjects/GameObject.js#L357
Since: 3.23.0
initPipeline
<instance> initPipeline([pipeline])
Description:
Sets the initial WebGL Pipeline of this Game Object.
This should only be called during the instantiation of the Game Object. After that, use setPipeline
.
Tags:
- webglOnly
Parameters:
name | type | optional | description |
---|---|---|---|
pipeline | string | Phaser.Renderer.WebGL.WebGLPipeline | Yes | Either the string-based name of the pipeline, or a pipeline instance to set. |
Returns: boolean - true
if the pipeline was set successfully, otherwise false
.
Inherits: Phaser.GameObjects.Components.Pipeline#initPipeline
Source: src/gameobjects/components/Pipeline.js#L53
Since: 3.0.0
initPostPipeline
<instance> initPostPipeline([preFX])
Description:
This should only be called during the instantiation of the Game Object.
It is called by default by all core Game Objects and doesn't need calling again.
After that, use setPostPipeline
.
Tags:
- webglOnly
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
preFX | boolean | Yes | false | Does this Game Object support Pre FX? |
Inherits: Phaser.GameObjects.Components.PostPipeline#initPostPipeline
Source: src/gameobjects/components/PostPipeline.js#L113
Since: 3.60.0
killAll
<instance> killAll()
Description:
Deactivates every particle in this emitter immediately.
This particles are killed but do not emit an event or callback.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2276
Since: 3.0.0
listenerCount
<instance> listenerCount(event)
Description:
Return the number of listeners listening to a given event.
Parameters:
name | type | optional | description |
---|---|---|---|
event | string | symbol | No | The event name. |
Returns: number - The number of listeners.
Inherits: Phaser.Events.EventEmitter#listenerCount
Source: src/events/EventEmitter.js#L75
Since: 3.0.0
listeners
<instance> listeners(event)
Description:
Return the listeners registered for a given event.
Parameters:
name | type | optional | description |
---|---|---|---|
event | string | symbol | No | The event name. |
Returns: Array.<function()> - The registered listeners.
Inherits: Phaser.Events.EventEmitter#listeners
Source: src/events/EventEmitter.js#L64
Since: 3.0.0
off
<instance> off(event, [fn], [context], [once])
Description:
Remove the listeners of a given event.
Parameters:
name | type | optional | description |
---|---|---|---|
event | string | symbol | No | The event name. |
fn | function | Yes | Only remove the listeners that match this function. |
context | * | Yes | Only remove the listeners that have this context. |
once | boolean | Yes | Only remove one-time listeners. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - this
.
Inherits: Phaser.Events.EventEmitter#off
Source: src/events/EventEmitter.js#L151
Since: 3.0.0
on
<instance> on(event, fn, [context])
Description:
Add a listener for a given event.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
event | string | symbol | No | The event name. | |
fn | function | No | The listener function. | |
context | * | Yes | "this" | The context to invoke the listener with. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - this
.
Inherits: Phaser.Events.EventEmitter#on
Source: src/events/EventEmitter.js#L98
Since: 3.0.0
once
<instance> once(event, fn, [context])
Description:
Add a one-time listener for a given event.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
event | string | symbol | No | The event name. | |
fn | function | No | The listener function. | |
context | * | Yes | "this" | The context to invoke the listener with. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - this
.
Inherits: Phaser.Events.EventEmitter#once
Source: src/events/EventEmitter.js#L124
Since: 3.0.0
onParticleDeath
<instance> onParticleDeath(callback, [context])
Description:
Sets a function to call for each particle death.
Parameters:
name | type | optional | description |
---|---|---|---|
callback | No | The function. | |
context | * | Yes | The function's calling context. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2244
Since: 3.0.0
onParticleEmit
<instance> onParticleEmit(callback, [context])
Description:
Sets a function to call for each newly emitted particle.
Parameters:
name | type | optional | description |
---|---|---|---|
callback | No | The function. | |
context | * | Yes | The calling context. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2212
Since: 3.0.0
overlap
<instance> overlap(target)
Description:
Takes either a Rectangle Geometry object or an Arcade Physics Body and tests to see if it intersects with any currently alive Particle in this Emitter.
Overlapping particles are returned in an array, where you can perform further processing on them. If nothing overlaps then the array will be empty.
Parameters:
name | type | optional | description |
---|---|---|---|
target | No | A Rectangle or Arcade Physics Body to check for intersection against all alive particles. |
Returns: Array.<Phaser.GameObjects.Particles.Particle> - An array of Particles that overlap with the given target.
Source: src/gameobjects/particles/ParticleEmitter.js#L2892
Since: 3.60.0
pause
<instance> pause()
Description:
Deactivates the emitter.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2429
Since: 3.0.0
preDestroy
<instance> preDestroy()
Description:
Destroys this Particle Emitter and all Particles it owns.
Source: src/gameobjects/particles/ParticleEmitter.js#L3920
Since: 3.60.0
preUpdate
<instance> preUpdate(time, delta)
Description:
Updates this emitter and its particles.
Parameters:
name | type | optional | description |
---|---|---|---|
time | number | No | The current timestamp as generated by the Request Animation Frame or SetTimeout. |
delta | number | No | The delta time, in ms, elapsed since the last frame. |
Fires: Phaser.GameObjects.Particles.Events#event:COMPLETE
Source: src/gameobjects/particles/ParticleEmitter.js#L2768
Since: 3.0.0
removeAllListeners
<instance> removeAllListeners([event])
Description:
Remove all listeners, or those of the specified event.
Parameters:
name | type | optional | description |
---|---|---|---|
event | string | symbol | Yes | The event name. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - this
.
Inherits: Phaser.Events.EventEmitter#removeAllListeners
Source: src/events/EventEmitter.js#L165
Since: 3.0.0
removeDeathZone
<instance> removeDeathZone(zone)
Description:
Removes the given Particle Death Zone from this Emitter.
Parameters:
name | type | optional | description |
---|---|---|---|
zone | No | The Death Zone that should be removed from this Emitter. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1769
Since: 3.60.0
removedFromScene
<instance> removedFromScene()
Description:
This callback is invoked when this Game Object is removed from a Scene.
Can be overriden by custom Game Objects, but be aware of some Game Objects that will use this, such as Sprites, to removed themselves from the Update List.
You can also listen for the REMOVED_FROM_SCENE
event from this Game Object.
Inherits: Phaser.GameObjects.GameObject#removedFromScene
Source: src/gameobjects/GameObject.js#L577
Since: 3.50.0
removeEmitZone
<instance> removeEmitZone(zone)
Description:
Removes the given Particle Emission Zone from this Emitter.
Parameters:
name | type | optional | description |
---|---|---|---|
zone | Phaser.GameObjects.Particles.Zones.EdgeZone | Phaser.GameObjects.Particles.Zones.RandomZone | No | The Emission Zone that should be removed from this Emitter. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1877
Since: 3.60.0
removeFromDisplayList
<instance> removeFromDisplayList()
Description:
Removes this Game Object from the Display List it is currently on.
A Game Object can only exist on one Display List at any given time, but may move freely removed and added back at a later stage.
You can query which list it is on by looking at the Phaser.GameObjects.GameObject#displayList
property.
If a Game Object isn't on any Display List, it will not be rendered. If you just wish to temporarly
disable it from rendering, consider using the setVisible
method, instead.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object.
Fires: Phaser.Scenes.Events#event:REMOVED_FROM_SCENE, Phaser.GameObjects.Events#event:REMOVED_FROM_SCENE
Inherits: Phaser.GameObjects.GameObject#removeFromDisplayList
Source: src/gameobjects/GameObject.js#L760
Since: 3.53.0
removeFromUpdateList
<instance> removeFromUpdateList()
Description:
Removes this Game Object from the Scene's Update List.
When a Game Object is on the Update List, it will have its preUpdate
method called
every game frame. Calling this method will remove it from the list, preventing this.
Removing a Game Object from the Update List will stop most internal functions working. For example, removing a Sprite from the Update List will prevent it from being able to run animations.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object.
Inherits: Phaser.GameObjects.GameObject#removeFromUpdateList
Source: src/gameobjects/GameObject.js#L798
Since: 3.53.0
removeInteractive
<instance> removeInteractive([resetCursor])
Description:
If this Game Object has previously been enabled for input, this will queue it for removal, causing it to no longer be interactive. The removal happens on the next game step, it is not immediate.
The Interactive Object that was assigned to this Game Object will be destroyed, removed from the Input Manager and cleared from this Game Object.
If you wish to re-enable this Game Object at a later date you will need to
re-create its InteractiveObject by calling setInteractive
again.
If you wish to only temporarily stop an object from receiving input then use
disableInteractive
instead, as that toggles the interactive state, where-as
this erases it completely.
If you wish to resize a hit area, don't remove and then set it as being
interactive. Instead, access the hitarea object directly and resize the shape
being used. I.e.: sprite.input.hitArea.setSize(width, height)
(assuming the
shape is a Rectangle, which it is by default.)
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
resetCursor | boolean | Yes | false | Should the currently active Input cursor, if any, be reset to the default cursor? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#removeInteractive
Source: src/gameobjects/GameObject.js#L519
Since: 3.7.0
removeListener
<instance> removeListener(event, [fn], [context], [once])
Description:
Remove the listeners of a given event.
Parameters:
name | type | optional | description |
---|---|---|---|
event | string | symbol | No | The event name. |
fn | function | Yes | Only remove the listeners that match this function. |
context | * | Yes | Only remove the listeners that have this context. |
once | boolean | Yes | Only remove one-time listeners. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - this
.
Inherits: Phaser.Events.EventEmitter#removeListener
Source: src/events/EventEmitter.js#L137
Since: 3.0.0
removeParticleProcessor
<instance> removeParticleProcessor(processor)
Description:
Removes a Particle Processor from this Emitter.
The Processor must belong to this Emitter to be removed.
It is not destroyed when removed, allowing you to move it to another Emitter Manager,
so if you no longer require it you should call its destroy
method directly.
Tags:
- generic
Parameters:
name | type | optional | description |
---|---|---|---|
processor | T | No | The Particle Processor to remove from this Emitter Manager. |
Returns: T - The Particle Processor that was removed, or null if it could not be found.
Source: src/gameobjects/particles/ParticleEmitter.js#L2063
Since: 3.60.0
removePostPipeline
<instance> removePostPipeline(pipeline)
Description:
Removes a type of Post Pipeline instances from this Game Object, based on the given name, and destroys them.
If you wish to remove all Post Pipelines use the resetPostPipeline
method instead.
Tags:
- webglOnly
Parameters:
name | type | optional | description |
---|---|---|---|
pipeline | No | The string-based name of the pipeline, or a pipeline class. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object.
Inherits: Phaser.GameObjects.Components.PostPipeline#removePostPipeline
Source: src/gameobjects/components/PostPipeline.js#L299
Since: 3.60.0
reserve
<instance> reserve(count)
Description:
Creates inactive particles and adds them to this emitter's pool.
If ParticleEmitter.maxParticles
is set it will limit the
value passed to this method to make sure it's not exceeded.
Parameters:
name | type | optional | description |
---|---|---|---|
count | number | No | The number of particles to create. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2119
Since: 3.0.0
resetCounters
<instance> resetCounters(frequency, on)
Description:
Resets the internal counter trackers.
You shouldn't ever need to call this directly.
Parameters:
name | type | optional | description |
---|---|---|---|
frequency | number | No | The frequency counter. |
on | boolean | No | Set the complete flag. |
Source: src/gameobjects/particles/ParticleEmitter.js#L1153
Since: 3.60.0
resetPipeline
<instance> resetPipeline([resetData])
Description:
Resets the WebGL Pipeline of this Game Object back to the default it was created with.
Tags:
- webglOnly
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
resetData | boolean | Yes | false | Reset the |
Returns: boolean - true
if the pipeline was reset successfully, otherwise false
.
Inherits: Phaser.GameObjects.Components.Pipeline#resetPipeline
Source: src/gameobjects/components/Pipeline.js#L176
Since: 3.0.0
resetPostPipeline
<instance> resetPostPipeline([resetData])
Description:
Resets the WebGL Post Pipelines of this Game Object. It does this by calling
the destroy
method on each post pipeline and then clearing the local array.
Tags:
- webglOnly
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
resetData | boolean | Yes | false | Reset the |
Inherits: Phaser.GameObjects.Components.PostPipeline#resetPostPipeline
Source: src/gameobjects/components/PostPipeline.js#L269
Since: 3.60.0
resume
<instance> resume()
Description:
Activates the emitter.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2444
Since: 3.0.0
setAbove
<instance> setAbove(gameObject)
Description:
Move this Game Object so that it appears above the given Game Object.
This means it will render immediately after the other object in the display list.
Both objects must belong to the same display list, or parent container.
This method does not change this Game Objects depth
value, it simply alters its list position.
Parameters:
name | type | optional | description |
---|---|---|---|
gameObject | No | The Game Object that this Game Object will be moved to be above. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Depth#setAbove
Source: src/gameobjects/components/Depth.js#L139
Since: 3.85.0
setActive
<instance> setActive(value)
Description:
Sets the active
property of this Game Object and returns this Game Object for further chaining.
A Game Object with its active
property set to true
will be updated by the Scenes UpdateList.
Parameters:
name | type | optional | description |
---|---|---|---|
value | boolean | No | True if this Game Object should be set as active, false if not. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#setActive
Source: src/gameobjects/GameObject.js#L216
Since: 3.0.0
setAlpha
<instance> setAlpha([value])
Description:
Set the Alpha level of this Game Object. The alpha controls the opacity of the Game Object as it renders. Alpha values are provided as a float between 0, fully transparent, and 1, fully opaque.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
value | number | Yes | 1 | The alpha value applied across the whole Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.AlphaSingle#setAlpha
Source: src/gameobjects/components/AlphaSingle.js#L48
Since: 3.0.0
setAngle
<instance> setAngle([degrees])
Description:
Sets the angle of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
degrees | number | Yes | 0 | The rotation of this Game Object, in degrees. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setAngle
Source: src/gameobjects/components/Transform.js#L364
Since: 3.0.0
setAnim
<instance> setAnim(anims, [pickRandom], [quantity])
Description:
Sets a pattern for assigning animations to emitted particles. The anims
configuration can be any of:
anim: 'red' anim: [ 'red', 'green', 'blue', 'pink', 'white' ] anim: { anims: [ 'red', 'green', 'blue', 'pink', 'white' ], [cycle: bool], [quantity: int] }
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
anims | string | Array.<string> | Phaser.Types.GameObjects.Particles.ParticleEmitterAnimConfig | No | |
pickRandom | boolean | Yes | true | Whether animations should be assigned at random from |
quantity | number | Yes | 1 | The number of consecutive particles that will receive each animation. If a config object is given, this parameter is ignored. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1373
Since: 3.60.0
setBelow
<instance> setBelow(gameObject)
Description:
Move this Game Object so that it appears below the given Game Object.
This means it will render immediately under the other object in the display list.
Both objects must belong to the same display list, or parent container.
This method does not change this Game Objects depth
value, it simply alters its list position.
Parameters:
name | type | optional | description |
---|---|---|---|
gameObject | No | The Game Object that this Game Object will be moved to be below. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Depth#setBelow
Source: src/gameobjects/components/Depth.js#L167
Since: 3.85.0
setBlendMode
<instance> setBlendMode(value)
Description:
Sets the Blend Mode being used by this Game Object.
This can be a const, such as Phaser.BlendModes.SCREEN
, or an integer, such as 4 (for Overlay)
Under WebGL only the following Blend Modes are available:
- NORMAL
- ADD
- MULTIPLY
- SCREEN
- ERASE (only works when rendering to a framebuffer, like a Render Texture)
Canvas has more available depending on browser support.
You can also create your own custom Blend Modes in WebGL.
Blend modes have different effects under Canvas and WebGL, and from browser to browser, depending on support. Blend Modes also cause a WebGL batch flush should it encounter a new blend mode. For these reasons try to be careful about the construction of your Scene and the frequency in which blend modes are used.
Parameters:
name | type | optional | description |
---|---|---|---|
value | string | Phaser.BlendModes | number | No |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.BlendMode#setBlendMode
Source: src/gameobjects/components/BlendMode.js#L80
Since: 3.0.0
setConfig
<instance> setConfig(config)
Description:
Takes an Emitter Configuration file and resets this Emitter, using any properties defined in the config to then set it up again.
Parameters:
name | type | optional | description |
---|---|---|---|
config | No | Settings for this emitter. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L936
Since: 3.60.0
setData
<instance> setData(key, [data])
Description:
Allows you to store a key value pair within this Game Objects Data Manager.
If the Game Object has not been enabled for data (via setDataEnabled
) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
sprite.setData('name', 'Red Gem Stone');
You can also pass in an object of key value pairs as the first argument:
sprite.setData({ name: 'Red Gem Stone', level: 2, owner: 'Link', gold: 50 });
To get a value back again you can call getData
:
sprite.getData('gold');
Or you can access the value directly via the values
property, where it works like any other variable:
sprite.data.values.gold += 50;
When the value is first set, a setdata
event is emitted from this Game Object.
If the key already exists, a changedata
event is emitted instead, along an event named after the key.
For example, if you updated an existing key called PlayerLives
then it would emit the event changedata-PlayerLives
.
These events will be emitted regardless if you use this method to set the value, or the direct values
setter.
Please note that the data keys are case-sensitive and must be valid JavaScript Object property strings.
This means the keys gold
and Gold
are treated as two unique values within the Data Manager.
Tags:
- generic
- genericUse
Parameters:
name | type | optional | description |
---|---|---|---|
key | string | object | No | The key to set the value for. Or an object of key value pairs. If an object the |
data | * | Yes | The value to set for the given key. If an object is provided as the key this argument is ignored. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#setData
Source: src/gameobjects/GameObject.js#L295
Since: 3.0.0
setDataEnabled
<instance> setDataEnabled()
Description:
Adds a Data Manager component to this Game Object.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#setDataEnabled
Source: src/gameobjects/GameObject.js#L276
Since: 3.0.0
setDepth
<instance> setDepth(value)
Description:
The depth of this Game Object within the Scene.
The depth is also known as the 'z-index' in some environments, and allows you to change the rendering order of Game Objects, without actually moving their position in the display list.
The default depth is zero. A Game Object with a higher depth value will always render in front of one with a lower value.
Setting the depth will queue a depth sort event within the Scene.
Parameters:
name | type | optional | description |
---|---|---|---|
value | number | No | The depth of this Game Object. Ensure this value is only ever a number data-type. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Depth#setDepth
Source: src/gameobjects/components/Depth.js#L64
Since: 3.0.0
setEmitterAngle
<instance> setEmitterAngle(value)
Description:
Sets the angle of a Phaser.GameObjects.Particles.ParticleEmitter#radial particle stream.
The value is given in degrees using Phaser's right-handed coordinate system.
Parameters:
name | type | optional | description |
---|---|---|---|
value | No | The angle of the initial velocity of emitted particles, in degrees. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1624
Since: 3.0.0
setEmitterFrame
<instance> setEmitterFrame(frames, [pickRandom], [quantity])
Description:
Sets a pattern for assigning texture frames to emitted particles. The frames
configuration can be any of:
frame: 0 frame: 'red' frame: [ 0, 1, 2, 3 ] frame: [ 'red', 'green', 'blue', 'pink', 'white' ] frame: { frames: [ 'red', 'green', 'blue', 'pink', 'white' ], [cycle: bool], [quantity: int] }
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
frames | array | string | number | Phaser.Types.GameObjects.Particles.ParticleEmitterFrameConfig | No |
pickRandom | boolean | Yes | true | Whether frames should be assigned at random from |
quantity | number | Yes | 1 | The number of consecutive particles that will receive each frame. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1265
Since: 3.0.0
setEmitZone
<instance> setEmitZone(zone)
Description:
Changes the currently active Emission Zone. The zones should have already
been added to this Emitter either via the emitter config, or the
addEmitZone
method.
Call this method by passing either a numeric zone index value, or the zone instance itself.
Prior to v3.60 an Emitter could only have a single Emit Zone and this method was how you set it. From 3.60 and up it now performs a different function and swaps between all available active zones.
Parameters:
name | type | optional | description |
---|---|---|---|
zone | No |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1992
Since: 3.0.0
setFrame
<instance> setFrame(frame, [updateSize], [updateOrigin])
Description:
Sets the frame this Game Object will use to render with.
If you pass a string or index then the Frame has to belong to the current Texture being used by this Game Object.
If you pass a Frame instance, then the Texture being used by this Game Object will also be updated.
Calling setFrame
will modify the width
and height
properties of your Game Object.
It will also change the origin
if the Frame has a custom pivot point, as exported from packages like Texture Packer.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
frame | string | number | No | ||
updateSize | boolean | Yes | true | Should this call adjust the size of the Game Object? |
updateOrigin | boolean | Yes | true | Should this call adjust the origin of the Game Object? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Texture#setFrame
Source: src/gameobjects/components/Texture.js#L75
Since: 3.0.0
setFrequency
<instance> setFrequency(frequency, [quantity])
Description:
Sets the emitter's Phaser.GameObjects.Particles.ParticleEmitter#frequency and Phaser.GameObjects.Particles.ParticleEmitter#quantity.
Parameters:
name | type | optional | description |
---|---|---|---|
frequency | number | No | The time interval (>= 0) of each flow cycle, in ms; or -1 to put the emitter in explosion mode. |
quantity | Yes | The number of particles to release at each flow cycle or explosion. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1677
Since: 3.0.0
setInteractive
<instance> setInteractive([hitArea], [callback], [dropZone])
Description:
Pass this Game Object to the Input Manager to enable it for Input.
Input works by using hit areas, these are nearly always geometric shapes, such as rectangles or circles, that act as the hit area for the Game Object. However, you can provide your own hit area shape and callback, should you wish to handle some more advanced input detection.
If no arguments are provided it will try and create a rectangle hit area based on the texture frame the Game Object is using. If this isn't a texture-bound object, such as a Graphics or BitmapText object, this will fail, and you'll need to provide a specific shape for it to use.
You can also provide an Input Configuration Object as the only argument to this method.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
hitArea | Yes | Either an input configuration object, or a geometric shape that defines the hit area for the Game Object. If not given it will try to create a Rectangle based on the texture frame. | ||
callback | Yes | The callback that determines if the pointer is within the Hit Area shape or not. If you provide a shape you must also provide a callback. | ||
dropZone | boolean | Yes | false | Should this Game Object be treated as a drop zone target? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#setInteractive
Source: src/gameobjects/GameObject.js#L456
Since: 3.0.0
setMask
<instance> setMask(mask)
Description:
Sets the mask that this Game Object will use to render with.
The mask must have been previously created and can be either a GeometryMask or a BitmapMask. Note: Bitmap Masks only work on WebGL. Geometry Masks work on both WebGL and Canvas.
If a mask is already set on this Game Object it will be immediately replaced.
Masks are positioned in global space and are not relative to the Game Object to which they are applied. The reason for this is that multiple Game Objects can all share the same mask.
Masks have no impact on physics or input detection. They are purely a rendering component that allows you to limit what is visible during the render pass.
Parameters:
name | type | optional | description |
---|---|---|---|
mask | Phaser.Display.Masks.BitmapMask | Phaser.Display.Masks.GeometryMask | No | The mask this Game Object will use when rendering. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Mask#setMask
Source: src/gameobjects/components/Mask.js#L28
Since: 3.6.2
setName
<instance> setName(value)
Description:
Sets the name
property of this Game Object and returns this Game Object for further chaining.
The name
property is not populated by Phaser and is presented for your own use.
Parameters:
name | type | optional | description |
---|---|---|---|
value | string | No | The name to be given to this Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#setName
Source: src/gameobjects/GameObject.js#L234
Since: 3.0.0
setParticleAlpha
<instance> setParticleAlpha(value)
Description:
Sets the opacity (alpha) of emitted particles.
You can also set the alpha of the entire emitter via setAlpha
.
Parameters:
name | type | optional | description |
---|---|---|---|
value | Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType | Phaser.Types.GameObjects.Particles.EmitterOpOnUpdateType | No | A value between 0 (transparent) and 1 (opaque). |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1585
Since: 3.60.0
setParticleGravity
<instance> setParticleGravity(x, y)
Description:
Sets the gravity applied to emitted particles.
Parameters:
name | type | optional | description |
---|---|---|---|
x | number | No | Horizontal acceleration due to gravity, in pixels per second squared. Set to zero for no gravity. |
y | number | No | Vertical acceleration due to gravity, in pixels per second squared. Set to zero for no gravity. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1566
Since: 3.60.0
setParticleLifespan
<instance> setParticleLifespan(value)
Description:
Sets the lifespan of newly emitted particles in milliseconds.
Parameters:
name | type | optional | description |
---|---|---|---|
value | No | The lifespan of a particle, in ms. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1643
Since: 3.60.0
setParticleScale
<instance> setParticleScale([x], [y])
Description:
Sets the vertical and horizontal scale of the emitted particles.
You can also set the scale of the entire emitter via setScale
.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | Yes | 1 | The horizontal scale of the emitted Particles. |
y | number | Yes | "x" | The vertical scale of emitted Particles. If not set it will use the |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1542
Since: 3.60.0
setParticleSpeed
<instance> setParticleSpeed(x, [y])
Description:
Sets the initial radial speed of emitted particles.
Changes the emitter to radial mode.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | No | The horizontal speed of the emitted Particles. | |
y | number | Yes | "x" | The vertical speed of emitted Particles. If not set it will use the |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1508
Since: 3.60.0
setParticleTint
<instance> setParticleTint(value)
Description:
Sets the color tint of emitted particles.
This is a WebGL only feature.
Tags:
- webglOnly
Parameters:
name | type | optional | description |
---|---|---|---|
value | Phaser.Types.GameObjects.Particles.EmitterOpOnEmitType | Phaser.Types.GameObjects.Particles.EmitterOpOnUpdateType | No | A value between 0 and 0xffffff. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1604
Since: 3.60.0
setPipeline
<instance> setPipeline(pipeline, [pipelineData], [copyData])
Description:
Sets the main WebGL Pipeline of this Game Object.
Also sets the pipelineData
property, if the parameter is given.
Tags:
- webglOnly
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
pipeline | string | Phaser.Renderer.WebGL.WebGLPipeline | No | Either the string-based name of the pipeline, or a pipeline instance to set. | |
pipelineData | object | Yes | Optional pipeline data object that is set in to the | |
copyData | boolean | Yes | true | Should the pipeline data object be deep copied into the |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Pipeline#setPipeline
Source: src/gameobjects/components/Pipeline.js#L100
Since: 3.0.0
setPipelineData
<instance> setPipelineData(key, [value])
Description:
Adds an entry to the pipelineData
object belonging to this Game Object.
If the 'key' already exists, its value is updated. If it doesn't exist, it is created.
If value
is undefined, and key
exists, key
is removed from the data object.
Tags:
- webglOnly
Parameters:
name | type | optional | description |
---|---|---|---|
key | string | No | The key of the pipeline data to set, update, or delete. |
value | any | Yes | The value to be set with the key. If |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Pipeline#setPipelineData
Source: src/gameobjects/components/Pipeline.js#L144
Since: 3.50.0
setPosition
<instance> setPosition([x], [y], [z], [w])
Description:
Sets the position of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | Yes | 0 | The x position of this Game Object. |
y | number | Yes | "x" | The y position of this Game Object. If not set it will use the |
z | number | Yes | 0 | The z position of this Game Object. |
w | number | Yes | 0 | The w position of this Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setPosition
Source: src/gameobjects/components/Transform.js#L265
Since: 3.0.0
setPostPipeline
<instance> setPostPipeline(pipelines, [pipelineData], [copyData])
Description:
Sets one, or more, Post Pipelines on this Game Object.
Post Pipelines are invoked after this Game Object has rendered to its target and are commonly used for post-fx.
The post pipelines are appended to the postPipelines
array belonging to this
Game Object. When the renderer processes this Game Object, it iterates through the post
pipelines in the order in which they appear in the array. If you are stacking together
multiple effects, be aware that the order is important.
If you call this method multiple times, the new pipelines will be appended to any existing
post pipelines already set. Use the resetPostPipeline
method to clear them first, if required.
You can optionally also set the postPipelineData
property, if the parameter is given.
Tags:
- webglOnly
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
pipelines | string | Array.<string> | function | Array.<function()> | |
pipelineData | object | Yes | Optional pipeline data object that is set in to the | |
copyData | boolean | Yes | true | Should the pipeline data object be deep copied into the |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.PostPipeline#setPostPipeline
Source: src/gameobjects/components/PostPipeline.js#L140
Since: 3.60.0
setPostPipelineData
<instance> setPostPipelineData(key, [value])
Description:
Adds an entry to the postPipelineData
object belonging to this Game Object.
If the 'key' already exists, its value is updated. If it doesn't exist, it is created.
If value
is undefined, and key
exists, key
is removed from the data object.
Tags:
- webglOnly
Parameters:
name | type | optional | description |
---|---|---|---|
key | string | No | The key of the pipeline data to set, update, or delete. |
value | any | Yes | The value to be set with the key. If |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.PostPipeline#setPostPipelineData
Source: src/gameobjects/components/PostPipeline.js#L205
Since: 3.60.0
setQuantity
<instance> setQuantity(quantity)
Description:
Sets the number of particles released at each flow cycle or explosion.
Parameters:
name | type | optional | description |
---|---|---|---|
quantity | No | The number of particles to release at each flow cycle or explosion. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1660
Since: 3.0.0
setRadial
<instance> setRadial([value])
Description:
Turns Phaser.GameObjects.Particles.ParticleEmitter#radial particle movement on or off.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
value | boolean | Yes | true | Radial mode (true) or point mode (true). |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1438
Since: 3.0.0
setRandomPosition
<instance> setRandomPosition([x], [y], [width], [height])
Description:
Sets the position of this Game Object to be a random position within the confines of the given area.
If no area is specified a random position between 0 x 0 and the game width x height is used instead.
The position does not factor in the size of this Game Object, meaning that only the origin is guaranteed to be within the area.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | Yes | 0 | The x position of the top-left of the random area. |
y | number | Yes | 0 | The y position of the top-left of the random area. |
width | number | Yes | The width of the random area. | |
height | number | Yes | The height of the random area. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setRandomPosition
Source: src/gameobjects/components/Transform.js#L313
Since: 3.8.0
setRotation
<instance> setRotation([radians])
Description:
Sets the rotation of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
radians | number | Yes | 0 | The rotation of this Game Object, in radians. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setRotation
Source: src/gameobjects/components/Transform.js#L345
Since: 3.0.0
setScale
<instance> setScale([x], [y])
Description:
Sets the scale of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | Yes | 1 | The horizontal scale of this Game Object. |
y | number | Yes | "x" | The vertical scale of this Game Object. If not set it will use the |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setScale
Source: src/gameobjects/components/Transform.js#L383
Since: 3.0.0
setScrollFactor
<instance> setScrollFactor(x, [y])
Description:
Sets the scroll factor of this Game Object.
The scroll factor controls the influence of the movement of a Camera upon this Game Object.
When a camera scrolls it will change the location at which this Game Object is rendered on-screen. It does not change the Game Objects actual position values.
A value of 1 means it will move exactly in sync with a camera. A value of 0 means it will not move at all, even if the camera moves. Other values control the degree to which the camera movement is mapped to this Game Object.
Please be aware that scroll factor values other than 1 are not taken in to consideration when calculating physics collisions. Bodies always collide based on their world position, but changing the scroll factor is a visual adjustment to where the textures are rendered, which can offset them from physics bodies if not accounted for in your code.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
x | number | No | The horizontal scroll factor of this Game Object. | |
y | number | Yes | "x" | The vertical scroll factor of this Game Object. If not set it will use the |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.ScrollFactor#setScrollFactor
Source: src/gameobjects/components/ScrollFactor.js#L64
Since: 3.0.0
setSortCallback
<instance> setSortCallback([callback])
Description:
Sets a callback to be used to sort the particles before rendering each frame.
This allows you to define your own logic and behavior in the callback.
The callback will be sent two parameters: the two Particles being compared,
and must adhere to the criteria of the compareFn
in Array.sort
:
Call this method with no parameters to reset the sort callback.
Setting your own callback will override both the particleBringToTop
and
sortProperty
settings of this Emitter.
Parameters:
name | type | optional | description |
---|---|---|---|
callback | Yes | The callback to invoke when the particles are sorted. Leave undefined to reset to the default. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2492
Since: 3.60.0
setSortProperty
<instance> setSortProperty([property], [ascending])
Description:
Set the property by which active particles are sorted prior to be rendered.
It allows you to control the rendering order of the particles.
This can be any valid property of the Particle
class, such as y
, alpha
or lifeT
.
The 'alive' particles array is sorted in place each game frame. Setting a
sort property will override the particleBringToTop
setting.
If you wish to use your own sorting function, see setSortCallback
instead.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
property | string | Yes | The property on the | |
ascending | boolean | Yes | true | Should the particles be sorted in ascending or descending order? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L2459
Since: 3.60.0
setState
<instance> setState(value)
Description:
Sets the current state of this Game Object.
Phaser itself will never modify the State of a Game Object, although plugins may do so.
For example, a Game Object could change from a state of 'moving', to 'attacking', to 'dead'. The state value should typically be an integer (ideally mapped to a constant in your game code), but could also be a string. It is recommended to keep it light and simple. If you need to store complex data about your Game Object, look at using the Data Component instead.
Parameters:
name | type | optional | description |
---|---|---|---|
value | number | string | No | The state of the Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#setState
Source: src/gameobjects/GameObject.js#L252
Since: 3.16.0
setTexture
<instance> setTexture(key, [frame], [updateSize], [updateOrigin])
Description:
Sets the texture and frame this Game Object will use to render with.
Textures are referenced by their string-based keys, as stored in the Texture Manager.
Calling this method will modify the width
and height
properties of your Game Object.
It will also change the origin
if the Frame has a custom pivot point, as exported from packages like Texture Packer.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
key | string | Phaser.Textures.Texture | No | The key of the texture to be used, as stored in the Texture Manager, or a Texture instance. | |
frame | string | number | Yes | The name or index of the frame within the Texture. | |
updateSize | boolean | Yes | true | Should this call adjust the size of the Game Object? |
updateOrigin | boolean | Yes | true | Should this call change the origin of the Game Object? |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Texture#setTexture
Source: src/gameobjects/components/Texture.js#L49
Since: 3.0.0
setToBack
<instance> setToBack()
Description:
Sets this Game Object to the back of the display list, or the back of its parent container.
Being at the back means it will render below everything else.
This method does not change this Game Objects depth
value, it simply alters its list position.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Depth#setToBack
Source: src/gameobjects/components/Depth.js#L115
Since: 3.85.0
setToTop
<instance> setToTop()
Description:
Sets this Game Object to be at the top of the display list, or the top of its parent container.
Being at the top means it will render on-top of everything else.
This method does not change this Game Objects depth
value, it simply alters its list position.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Depth#setToTop
Source: src/gameobjects/components/Depth.js#L91
Since: 3.85.0
setVisible
<instance> setVisible(value)
Description:
Sets the visibility of this Game Object.
An invisible Game Object will skip rendering, but will still process update logic.
Parameters:
name | type | optional | description |
---|---|---|---|
value | boolean | No | The visible state of the Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Visible#setVisible
Source: src/gameobjects/components/Visible.js#L63
Since: 3.0.0
setW
<instance> setW([value])
Description:
Sets the w position of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
value | number | Yes | 0 | The w position of this Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setW
Source: src/gameobjects/components/Transform.js#L465
Since: 3.0.0
setX
<instance> setX([value])
Description:
Sets the x position of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
value | number | Yes | 0 | The x position of this Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setX
Source: src/gameobjects/components/Transform.js#L405
Since: 3.0.0
setY
<instance> setY([value])
Description:
Sets the y position of this Game Object.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
value | number | Yes | 0 | The y position of this Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setY
Source: src/gameobjects/components/Transform.js#L424
Since: 3.0.0
setZ
<instance> setZ([value])
Description:
Sets the z position of this Game Object.
Note: The z position does not control the rendering order of 2D Game Objects. Use Phaser.GameObjects.Components.Depth#setDepth instead.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
value | number | Yes | 0 | The z position of this Game Object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Game Object instance.
Inherits: Phaser.GameObjects.Components.Transform#setZ
Source: src/gameobjects/components/Transform.js#L443
Since: 3.0.0
shutdown
<instance> shutdown()
Description:
Removes all listeners.
Inherits: Phaser.Events.EventEmitter#shutdown
Source: src/events/EventEmitter.js#L31
Since: 3.0.0
start
<instance> start([advance], [duration])
Description:
Turns Phaser.GameObjects.Particles.ParticleEmitter#on the emitter and resets the flow counter.
If this emitter is in flow mode (frequency >= 0; the default), the particle flow will start (or restart).
If this emitter is in explode mode (frequency = -1), nothing will happen. Use Phaser.GameObjects.Particles.ParticleEmitter#explode or Phaser.GameObjects.Particles.ParticleEmitter#flow instead.
Calling this method will emit the START
event.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
advance | number | Yes | 0 | Advance this number of ms in time through the emitter. |
duration | number | Yes | 0 | Limit this emitter to only emit particles for the given number of ms. Setting this parameter will override any duration already set in the Emitter configuration object. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Fires: Phaser.GameObjects.Particles.Events#event:START
Source: src/gameobjects/particles/ParticleEmitter.js#L2349
Since: 3.0.0
startFollow
<instance> startFollow(target, [offsetX], [offsetY], [trackVisible])
Description:
Continuously moves the particle origin to follow a Game Object's position.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
target | No | The Object to follow. | ||
offsetX | number | Yes | 0 | Horizontal offset of the particle origin from the Game Object. |
offsetY | number | Yes | 0 | Vertical offset of the particle origin from the Game Object. |
trackVisible | boolean | Yes | false | Whether the emitter's visible state will track the target's visible state. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1178
Since: 3.0.0
stop
<instance> stop([kill])
Description:
Turns off the emitter and
stops it from emitting further particles. Currently alive particles will remain
active until they naturally expire unless you set the kill
parameter to true
.
Calling this method will emit the STOP
event. When the final particle has
expired the COMPLETE
event will be emitted.
Parameters:
name | type | optional | default | description |
---|---|---|---|---|
kill | boolean | Yes | false | Kill all particles immediately (true), or leave them to die after their lifespan expires? (false, the default) |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Fires: Phaser.GameObjects.Particles.Events#event:STOP
Source: src/gameobjects/particles/ParticleEmitter.js#L2394
Since: 3.11.0
stopFollow
<instance> stopFollow()
Description:
Stops following a Game Object.
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1204
Since: 3.0.0
toggleData
<instance> toggleData(key)
Description:
Toggle a boolean value for the given key within this Game Objects Data Manager. If the key doesn't already exist in the Data Manager then it is toggled from false.
If the Game Object has not been enabled for data (via setDataEnabled
) then it will be enabled
before setting the value.
If the key doesn't already exist in the Data Manager then it is created.
When the value is first set, a setdata
event is emitted from this Game Object.
Parameters:
name | type | optional | description |
---|---|---|---|
key | string | No | The key to toggle the value for. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This GameObject.
Inherits: Phaser.GameObjects.GameObject#toggleData
Source: src/gameobjects/GameObject.js#L387
Since: 3.23.0
toJSON
<instance> toJSON()
Description:
Creates a description of this emitter suitable for JSON serialization.
Overrides: Phaser.GameObjects.GameObject#toJSON
Returns: Phaser.Types.GameObjects.JSONGameObject - A JSON representation of the Game Object.
Source: src/gameobjects/particles/ParticleEmitter.js#L1102
Since: 3.0.0
update
<instance> update([args])
Description:
To be overridden by custom GameObjects. Allows base objects to be used in a Pool.
Parameters:
name | type | optional | description |
---|---|---|---|
args | * | Yes | args |
Inherits: Phaser.GameObjects.GameObject#update
Source: src/gameobjects/GameObject.js#L592
Since: 3.0.0
updateConfig
<instance> updateConfig(config)
Description:
Takes an existing Emitter Configuration file and updates this Emitter.
Existing properties are overriden while new properties are added. The
updated configuration is then passed to the setConfig
method to reset
the Emitter with the updated configuration.
Parameters:
name | type | optional | description |
---|---|---|---|
config | No | Settings for this emitter. |
Returns: Phaser.GameObjects.Particles.ParticleEmitter - This Particle Emitter.
Source: src/gameobjects/particles/ParticleEmitter.js#L1072
Since: 3.85.0
willRender
<instance> willRender(camera)
Description:
Compares the renderMask with the renderFlags to see if this Game Object will render or not. Also checks the Game Object against the given Cameras exclusion list.
Parameters:
name | type | optional | description |
---|---|---|---|
camera | No | The Camera to check against this Game Object. |
Returns: boolean - True if the Game Object should be rendered, otherwise false.
Inherits: Phaser.GameObjects.GameObject#willRender
Source: src/gameobjects/GameObject.js#L617
Since: 3.0.0